Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Repair in Fort Pierce: What to Know First
CGI roof repair in Fort Pierce typically runs $350 to $1,800 depending on whether we’re replacing a failed seal, a cracked lite, or a full sash that’s taken on water. Most jobs are completed in a single visit because we stock the common CGI frame components and glass packs a Fort Pierce home actually uses. We’re an independent CGI service provider - not a factory rep - which means we fix the product without routing you through a warranty department that may or may not answer. If you own a CGI window, skyroof, or door system and it’s leaking, fogging, or binding, call (772) 218-5890 and a live person will answer.
This page is written for the homeowner who has a CGI product that’s failing and wants to know whether it’s repairable, what it’ll cost, and who in Fort Pierce can be trusted to touch it.
How CGI Products Fail - and How We Fix Them
- Sentinel Series skylight curb leaks. The Sentinel line is common on Fort Pierce flat and low-slope roofs. What we see after a decade of salt air and afternoon thunderstorms is the curb flashing pulling away from the deck, not the glass failing. Water gets in at the flashing seam, travels down the drywall, and the homeowner assumes the skylight itself is shot. Often it isn’t. We remove the old curb, reflash with new aluminum, and reset the unit. The glass stays.
- H series horizontal roller track corrosion. CGI H series sliders are built for impact, but the roller tracks sit low and collect sand and salt. On Fort Pierce homes within a few blocks of the Indian River, we see tracks pitting and binding within seven to ten years. The fix is a track replacement with stainless rollers, not a whole new door. Most outfits quote a full door. We quote the track and rollers because that’s what’s actually wrong.
- TruSeal insulated glass fogging on fixed lites. CGI uses laminated impact glass on the outer lite and an insulated inner lite on many fixed windows. When the seal between those two fails, you get fog between the panes. The impact layer is fine. The fix is a new insulated glass pack, ordered to match the original laminate spec, not a whole new window. We match the glass makeup exactly because a mismatched lite changes how the window handles a storm.
- Integra Series roof-mount vent operator failure. The Integra line’s roof vents use a worm-gear operator that corrodes in coastal air. When it seizes, the vent won’t open or won’t close. The handle snaps off, the homeowner thinks it’s catastrophic, and it’s usually a $120 operator swap. We keep those operators on the truck for the common sizes.
- Frame-to-roof penetration rot on SunEvent skylights. CGI’s SunEvent line uses a wood curb on some installations. In Fort Pierce humidity, that curb rots. The glass, the gasket, the metal cladding - all fine. We pull the unit, replace the curb with composite, reflash, and reset. That’s a full day, and it’s the difference between a $950 repair and a $3,200 replacement.
Our CGI Roof Repair Process
- 1
We answer the phone. You call (772) 218-5890. A person picks up. We ask what the product is doing, when it started, and what you’ve tried. We’ll tell you on that call whether it sounds repairable and what the range is.
- 2
We measure twice on site. Our technician arrives in uniform, introduces himself, and measures the opening, the glass, the frame, and the flashing. CGI’s dimensions are specific; an eighth-inch error means a reorder.
- 3
We give you a written line-item quote. You see exactly what we’re buying - OEM CGI parts where the warranty still matters, quality aftermarket where the OEM part is discontinued or overpriced. We tell you which and why, on paper.
- 4
We repair in one visit. Glass pack, flashing, operator, track, or curb. We bring the parts, do the work, and clean up. No second appointment left hanging.
- 5
We water-test before we leave. Every roof-related repair gets a hose test at the seam. If it leaks, we don’t leave. That’s the test, and it’s non-negotiable.
- 6
We register the warranty in writing. The Done Right Promise covers the workmanship. The manufacturer warranty on any OEM part gets registered before we pull out of the driveway.
What CGI Roof Repair Costs in Fort Pierce
- Operator or handle replacement: $95 to $160
- Insulated glass pack replacement (fixed lite): $350 to $700 depending on size
- Slider track and roller rebuild: $450 to $800 per panel
- Skylight curb reflash and reset: $600 to $1,000
- Wood curb replacement (rot): $850 to $1,400
- Full sash replacement on an impact door: $1,200 to $1,800
What moves the price: glass size, two-story ladder work, and whether the OEM part is still in production. If a CGI line has been discontinued, we’ll tell you what that means for parts availability before you spend a dollar. Call (772) 218-5890 for a free estimate. You’ll get a written number, not a maybe.
Why Fort Pierce Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been in Fort Pierce and along the Treasure Coast since 2008. Dale Kessler founded this company in 2008 out of a simple observation: out-of-true installs and voided warranties were problems worth fixing permanently. We are not the cheapest bid in town, and we don’t try to be. We’re the call you make when the first bid didn’t fix anything and the second bid stopped answering. Every CGI repair we do is backed by the Done Right Promise - if it isn’t right, we make it right, no paperwork, no arguing. Our technicians are background-checked and uniformed. They work in your home the way they’d work in their own mother’s. And because we install and service more than a dozen manufacturer lines, including PGT, CWS, ES Windows, and ECO Window Systems, we can quote you side by side if the honest answer is that a repair doesn’t make sense and replacement does.
FAQs
As an independent CGI service provider, we take care to use OEM parts where the manufacturer warranty is still active. A repair performed with proper replacement parts and documented methods does not void the original warranty on unmodified components. We register our workmanship warranty in writing on every job. If your CGI product is under warranty, call (772) 218-5890 and we’ll help you figure out the least expensive path - factory warranty claim or direct repair.
Both, and we’ll tell you which on paper. When the OEM part is still in production and your warranty matters, we buy CGI. When a CGI line has been discontinued or the OEM glass pack takes six weeks to arrive, we source quality aftermarket that matches the original laminate and impact spec. The decision is yours, and we show you the cost difference in writing.
Usually, yes. Most Fort Pierce skylight failures we see are flashing leaks, curb rot, or a failed operator. The glass itself is rarely the problem. We repair the curb, reflash, and reset. Call (772) 218-5890 and describe what you’re seeing. We’ll tell you on the phone what it likely is and what it’ll likely cost.
We schedule repairs based on severity, not first-come-first-served. A roof penetration that’s actively letting water in gets priority. Most CGI repairs in Fort Pierce are completed within the same week we quote them, and the repair itself is a single visit. A live person answers the phone 24 hours a day, so you’ll know where you stand the moment you call.
If the frame is sound and the glass is intact, repair almost always wins on cost. The decision to replace comes when the frame has rotted through, the product has been discontinued for years with no parts available, or the repair cost exceeds sixty percent of a new unit. We’ll show you the math in writing and let you decide. If replacement is the honest answer, we’ll quote CGI alongside PGT, CWS, ES Windows, and ECO Window Systems so you compare real options side by side.
If it is not right when the caulk dries, it will not be right in two years either. That’s the standard we work to on every CGI repair in Fort Pierce. Call (772) 218-5890 for a free estimate, written and itemized, before you spend a dollar anywhere else.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Pierce and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.