Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Fort Pierce: What to Know First
We provide independent CGI roof replacement and installation for Fort Pierce homeowners, with most single-panel and frame jobs completed in one visit and full roof replacements scheduled within five to seven business days depending on product availability. You’ll get a written line-item quote before any work starts, and the price on that sheet is the price you pay, no surprises after the fact. This page is for the homeowner who owns CGI windows or doors and wants the work done by people who know the product line well enough to fix what the last crew got wrong.
Call (772) 218-5890 to schedule a free estimate. We are an independent CGI service provider, not a manufacturer warranty agent.
Key Takeaways
- We install and replace CGI windows, doors, and roof-glazing units across Fort Pierce, including the Sentry, Estate, and Targa lines.
- You get a written quote first. The number on the quote is the number on the bill.
- Both warranty layers get registered in writing before our truck leaves your driveway.
- The Done Right Promise covers the workmanship. If it is not right, we come back and make it right.
How CGI Products Fail - and How We Fix Them
CGI builds a stout impact product. That said, in Fort Pierce the failure modes are consistent, and they are usually tied to how the unit was set in the opening, not to the glass itself. Here is what we see most often.
- Sentry Series roof glazing with seal failure at the top rail. The Sentry line uses a heavier top-hinged or fixed rooflight assembly, and when the original installer shimmed the top rail too tight against the buck, the seal compresses unevenly under the Fort Pierce sun. Within three to five years you get condensation between the panes and a faint chalky line along the top edge. The fix is a full glazing reseat, not a caulk smear. We pull the unit, rebed it on clean shims, and torque the mounting screws to CGI’s spec.
- Estate Series casement hardware binding after storm-season thermal expansion. The Estate casement operator arms are zinc-plated and tighten up as the frame expands and contracts through a wet St. Lucie County summer. Homeowners force the crank, strip the gear teeth, and then the window will not dog down tight. We replace the operator and drive gear as a matched pair, never just the handle. An aftermarket gear set with a different tooth pitch will bind again inside a year.
- Targa Series sliding glass roof panels that jump track after salt air pitting. Along the barrier island and anywhere within a half mile of the Indian River Lagoon, the stainless roller carriers in Targa sliders pit from airborne salt. Once the roller faces are scored, the panel rides heavy, drags, and eventually skips off the lower track. We replace the roller assemblies with marine-grade stainless carriers and re-lube the track with a dry silicone that will not hold sand.
- Weep holes blocked by mill sealant from the original roof deck flashing. Not a CGI defect. This is an installation failure. When contractors flash the roof curb above a CGI roof unit and run sealant over the frame’s top weep channel, water pools inside the track and the bottom rail starts to blister. We clear the weeps, replace any swollen gasket, and reseat the flashing so the drainage path stays open.
- Laminated glass strike cracks spread from edge-to-center in high-velocity windows. On the HVHZ-rated CGI lines along the coast, a small impact crack near the edge spreads in a branching pattern within a season. What begins as a hairline becomes a full laminate failure because moisture enters the interlayer. We replace the insulated glazing unit with a laminated IGU matched to the original DP rating. We do not patch laminate. It is not repairable, and a patch will not pass a re-inspection.
Our CGI Roof Replacement & Installation Process
Here is how a CGI job runs once you call.
- 1
Call and describe the unit. A live person answers at (772) 218-5890, day or night. We ask what series you have, when it was installed, and what it is doing that it should not be doing.
- 2
We measure the opening twice. Before quoting, our tech measures the rough opening, the frame dimensions, and the glazing thickness. CGI frames are extruded aluminum with tight tolerances. A sixteenth of an inch matters.
- 3
You get a written line-item quote on paper. We show you OEM parts and quality aftermarket parts side by side with prices for both. You decide. The quote is fixed, and it does not change after the work starts.
- 4
The work gets done in one visit. We remove the old unit, prep the opening, set the new or reseated glazing, and reinstall the flashing with the drainage weeps clear. The bench and the driveway stay clean.
- 5
We test before we leave. Every panel is cycled, dogged down, and water-tested with a garden hose if roof drainage is involved. The Keystone Standard applies: both warranty layers registered in writing, durations stated, before the truck pulls away.
- 6
The Done Right Promise covers it. If a CGI unit we installed gives you trouble within 90 days, we come back and make it right, no paperwork and no arguing.
What CGI Roof Replacement & Installation Costs in Fort Pierce
CGI glass is not cheap, and the install labor is not the place to save a few hundred dollars. Here is what Fort Pierce homeowners should expect to pay for common CGI roof replacement and installation scenarios, based on the jobs we quote here.
- Sentry fixed roof glazing reseat: $450 to $800 per unit, including new OEM gasket and sealant.
- Sentry fixed roof glazing full replacement: $900 to $1,400 per unit, depending on glazing size and HVHZ rating.
- Targa sliding panel roller and track service: $250 to $500 per panel, with marine-grade roller sets.
- Estate casement operator replacement: $180 to $340 per window, matched gear set and drive arm.
- Full-frame CGI roof window replacement with new curb flashing: $1,600 to $3,200 per opening, including flashing rework and sealant.
What moves the price is glazing size, whether the unit is HVHZ-rated, and how much flashing or curb repair the last installer left behind. The quote we hand you is the price. No change orders, no “while we were in there” additions. Call (772) 218-5890 for an exact number. The estimate is free.
Why Fort Pierce Homeowners Call TruePane Windows & Doors for CGI Work
We have been serving Fort Pierce and the Treasure Coast since 2008, founded by second-generation glazier Dale Kessler in 2008. Dale grew up off Okeechobee Road on the north side of Fort Pierce, where half the houses still had jalousie windows his father was convinced would outlast everything else. They did not. He learned the trade at Indian River State College and spent years doing residential glass and door work up and down the Treasure Coast before narrowing the company to windows and doors only. If the pane is not true, the job is not done.
Our techs are background-checked, uniformed, and trained to work on CGI, PGT, CWS, ES Windows, and ECO Window Systems without blaming the manufacturer for an installation problem. We register both warranty layers in writing before the truck leaves. A live person answers the phone at (772) 218-5890 every hour of every day. And the Done Right Promise means the work holds, or we come back.
FAQs
CGI’s written warranty covers the product, not the workmanship that set it. As an independent CGI service provider, we cannot act as the manufacturer’s warranty agent, but we do register the product warranty and the workmanship warranty in writing before we leave the job site. If a labor or material defect in our work shows up within 90 days, the Done Right Promise covers the correction. Call (772) 218-5890 for a free estimate and we will walk you through which warranty layer covers what.
Most single-unit CGI roof window replacements are completed in one visit once the glazing arrives, and standard Sentry units are typically in hand within five to seven business days. Custom sizes or HVHZ-rated glass can take two to three weeks from CGI’s distribution network. The fastest way to get an accurate timeline is to call (772) 218-5890 with the model and rough dimensions so we can check availability while you are on the phone.
If the frame is square and the glazing seal is intact, a reseat with new gasket and sealant usually solves the problem for $450 to $800 per unit. If the glass is cracked, fogged between panes, or the frame shows corrosion around the weep channels, replacement is cheaper in the long run than repeated repairs. If it is not right when the caulk dries, it will not be right in two years either, so we give you the straight answer before any work begins. Call (772) 218-5890 to schedule a free inspection.
We quote both on paper and let you decide. OEM CGI glazing and hardware match the original tolerances and keep the warranty chain cleaner. Some aftermarket parts, like marine-grade stainless roller carriers for Targa sliders, outperform what the factory shipped. The quote shows both prices side by side so you know exactly what you are buying before you spend a dollar. Call (772) 218-5890 for a free written estimate.
A full-frame CGI roof window replacement with new curb flashing runs $1,600 to $3,200 per opening in Fort Pierce, depending on glazing size and whether the unit needs HVHZ rating. A fixed Sentry glazing reseat runs $450 to $800. The exact number depends on your openings, and we hand you a fixed line-item quote before any work starts. Call (772) 218-5890 to schedule your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Pierce and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.