CWS Custom & Geometric Windows Nationwide | TruePane Windows & Doors

CWS Custom & Geometric Windows in Fort Pierce: What to Know First

CWS custom and geometric windows in Fort Pierce typically take us 8 to 12 weeks from final measurements to delivery, with installation done in a single visit. Independent CWS service runs $425 to $2,400 depending on whether we are rebuilding a radius, replacing glass in an arch, or reframing an oversized opening. If you live in a Fort Pierce home with CWS products and one is failing, call (772) 218-5890 and we will tell you over the phone whether it is a repair or a replacement, and what it should cost.

Call (772) 218-5890

This page is written for the CWS owner who has a shaped unit that is leaking, fogged, binding, or simply wrong from the day it was set. We are TruePane Windows & Doors, an independent CWS service provider. We are not affiliated with CWS, and we do not pretend to be. We are glaziers who fix what their windows do in our climate.

How CWS Products Fail - and How We Fix Them

Every manufacturer has a fingerprint. CWS makes a solid extruded aluminum product, but the shaped and custom units are where we get the most calls in Fort Pierce. Here is what we actually see.

• CWS Series 850 arch units crack at the radius bead. The aluminum at the inside curve of an arch carries more stress than the straight sections, and when the exterior sealant at the radius fails, water follows the bead line and pools at the sill. The homeowner sees a drip or a stain and assumes the glass seal failed. It has not. The glass is usually fine. The fix is pulling the stop, cleaning the radius channel, re-setting the bead with a marine-grade sealant rated for our salt air, and re-caulking the exterior leg. A $300 repair that gets misquoted as a $900 glass replacement, often enough.
• CWS geometric picture windows fog from the bottom corner, not the center. This is a desiccant failure, not a loose frame. The spacer bar inside the insulated glass unit carries desiccant that absorbs moisture between the panes. In a fixed geometric shape like a trapezoid or pentagon, the desiccant settles unevenly during manufacture, and the lower acute corner saturates first. You get a cloudy triangle in one corner within five to eight years. The only right fix is an IGU replacement (IGU stands for insulated glass unit). We order the new IGU cut to the same shape from a Florida glass fabricator we have used for twelve years, and we register the warranty in writing before we leave.
• CWS horizontal roller wheels in oversized custom sliders shear their nylon tires in summer. Fort Pierce heat bakes the nylon until it is brittle, and a 12-foot custom CWS slider with a 200-pound panel on four small wheels will tear the tire right off the hub. You will feel it when the panel drags, then hear it when you push harder and the steel hub grinds on the aluminum track. We replace all four wheels with a higher-durometer aftermarket set out of Miami, and we re-shim the panel so the weight distributes evenly across all four carriers. CWS does not sell the higher-durometer wheel as an OEM part, so a warranty-safe repair means an aftermarket part here, and we will say so on the invoice.
• CWS radius transoms over entry doors drop at the hinge side and the weatherstrip stops meeting. The transom frame is anchored to the door jamb header, and in older Fort Pierce homes where the lintel has settled a quarter inch, the transom follows it. The glass does not fail. The reveal between sash and frame grows. We pull the transom frame, re-shim the header side, and re-bed the frame so the reveal is consistent across the arc. Thirty-six screws, eight shims, and a tube of high-grade polyurethane. It takes most of a morning.
• CWS mullion joints on multi-section geometric assemblies leak at the seam, not the glass. When two custom shapes are mulled together in the factory, the joint gets a factory sealant that dries, hardens, and cracks over ten years of Fort Pierce sun. The water that gets in tracks the mullion seam and drips inside. We remove the interior stops on both sides of the mull, clean the factory sealant out, and re-seal with a two-part structural sealant, then retape the exterior seam. This is the repair that gets missed by a roofer or a stucco guy who blames the roof or the wall. It is almost never the roof.

Our CWS Custom & Geometric Windows Process

A CWS job with us runs in six honest steps, and you will know where you are in the process the whole time.

1. 1
   Call and talk to a person. You call (772) 218-5890 and a live person answers, 24 hours a day. You describe the window, the symptom, and the shape. We ask for photos by text if you can send them. No callback form, no voicemail tree.
2. 2
   Measurement and diagnosis at your home. A background-checked, uniformed technician comes out, measures the opening twice, and checks the frame, the glazing bead, the sealant lines, and the hardware. We tell you before we start whether it is a repair or a replacement, and why.
3. 3
   Parts decision, on paper. For repairs, we lay out OEM versus quality aftermarket options side by side, with prices, so you see exactly what you are buying and what the lead time is. For replacements, we quote CWS where it is still available and comparable lines like PGT, CGI, ES Windows, or ECO Window Systems if it makes better long-term sense for a Fort Pierce house.
4. 4
   The work itself. We set or repair the window with the right sealants for Atlantic exposure, the right shims for a true reveal, and the right hardware for the weight of the sash. Most CWS repairs and window replacements are done in a single visit.
5. 5
   Test, check, and register. We check the reveal at every point on the frame. We cycle the sash. We run water across the exterior if it is a leak repair. Then, before the truck leaves, we register both manufacturer warranty layers in writing, with durations stated. That is The Keystone Standard, and we have done it on every job since day one.
6. 6
   Follow-through. If something is not right when the caulk dries, you call. We come back and make it right under the Done Right Promise. No paperwork fights, no arguing, no fine print that covers neither.

What CWS Custom & Geometric Windows Costs in Fort Pierce

Here is the price range we see for CWS work in Fort Pierce, in real numbers.

• CWS arch radius bead re-seal: $425 to $675 per unit
• IGU replacement for a fogged geometric fixed window: $850 to $1,800 depending on shape and glass package
• CWS slider wheel and track service on an oversized custom unit: $350 to $750
• Full custom geometric or radius window replacement, installed: $2,100 to $8,600 depending on size, impact rating, and frame options
• Multi-section mullion re-seal: $500 to $1,200 per mull joint

What moves the price the most is whether you are rebuilding glass only or pulling and re-setting the entire frame. Impact-rated glass adds 30 to 45 percent over non-impact. A custom radius with a fritted or tinted finish jumps higher than a clear IGU. We will give you a written line-item quote up front, and the quote does not change once work starts. Call (772) 218-5890 to schedule a free estimate.

Why Fort Pierce Homeowners Call TruePane Windows & Doors for CWS Work

We have been in Fort Pierce long enough that the work itself is the referral. Dale Kessler founded this company in 2008 after years of working residential glass and door jobs up and down the Treasure Coast, and the same rule still hangs on the whiteboard: if the pane is not true, the job is not done. On a CWS arch or a geometric picture window, a true pane is measured at every point on the frame, not just at the level and the plumb line someone checked twice and called good.

Every job is backed by the Done Right Promise and The Keystone Standard. Both warranty layers get registered in writing before we pull away, with the durations stated. And because we are an authorized installer for more than a dozen manufacturer lines, when a CWS unit makes more sense to replace than repair, we quote it side by side against PGT, CGI, ES Windows, and ECO Window Systems so you see what your money buys in each line. We answer the phone twenty-four hours a day. We show up when we say we will. We stand behind the work. It has worked since 2008 of serving this community.

FAQs