Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterEntry Doors in Fort Pierce, FL | TruePane Windows & Doors
An entry door on the Treasure Coast works harder than almost any other part of the house. It’s the first thing guests touch, the daily workhorse for salt air and summer humidity, and the front-line opening when a hurricane pushes against the barrier island and the neighborhoods off US-1. TruePane Windows & Doors installs Therma-Tru fiberglass and steel entry door systems in Fort Pierce that are impact-rated, code-compliant, and visually dialed in for Florida architecture. We’re a local Fort Pierce installer, not a big-box drop-shipper, so every door we put in is set by our own crew, sealed, tested, and walked through with you before we call it done. Call (772) 218-5890 to talk about your front door.
Product Overview - Entry Doors
These are not standard builder-grade doors with an impact sticker slapped on the glass. The Entry Doors we install in Fort Pierce are Therma-Tru fiberglass and steel entry door systems, built to take an impact rating without giving up curb appeal. You get a door that meets Florida’s High-Velocity Hurricane Zone requirements and still looks like the centerpiece of your home, not a vault door.
Why fiberglass and steel? Both materials beat wood in coastal Florida for one simple reason: they don’t rot, warp, or swell when the humidity sits at 90 percent for five months straight. The fiberglass options come factory-finished or paint-grade, so you can match a specific trim color on a Mediterranean-style home in Indian River Estates or keep a clean white profile on a newer build in Lakewood Park. Steel doors give you a heavier, more rigid feel and suit modern or industrial elevations. Both frame materials are built around the same impact-rated glass packages and reinforced hardware prep.
The architectural range matters too. Single entry, double door, door with sidelites, and transom configurations are all available up to 48 inches wide per panel. That covers most Fort Pierce homes built from the 1960s ranch era through current coastal construction. The factory-finished paint-grade option means you’re not stuck with whatever the manufacturer thinks Florida wants. You choose the color, the glass, the hardware finish, and we order it cut to your opening.
Technical Specifications
Fiberglass or Steel. Both are corrosion-resistant and sized for impact-rated hardware and reinforced hinge preps.
Up to 48 inches wide. Larger openings are handled with double door configurations, sidelites, or transoms.
- Decorative Impact Glass Insert - patterned or textured glass that meets impact rating and adds privacy or architectural detail
- Low-E Insulated Glass Insert - insulated glass unit with a low-emissivity coating for thermal performance and impact compliance
- No Glass (Solid Panel) - completely solid door slab, no glazing opening, maximum security and lowest maintenance
- White
- Black
- Bronze
- Paintable Woodgrain Finish - textured fiberglass grain that accepts exterior acrylic latex paint
Miami-Dade NOA and Florida Product Approval numbers available per configuration. Engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements.
Hurricane & Compliance Performance
Here’s what we verify on every entry door quote we write in Fort Pierce. These are the standards that show up on your permit application and in your closing paperwork.
Impact-rated glazing uses laminated glass with a PVB (polyvinyl butyral) interlayer. The interlayer holds the glass in the frame under impact, so even if the outer pane fractures, the opening stays sealed and the pressure envelope of your home remains intact. That’s the difference between interior damage and a door that did its job.
Each door configuration carries a Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval number. These are issued per configuration, not as a blanket stamp, so we verify the exact number on your specific quote before you submit for permit. We never quote a door we can’t document.
These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That means they’re designed for the wind zones we actually build in across St. Lucie County, including barrier island and coastal exposure categories where standard doors don’t pass.
HVHZ-rated products are tested under a protocol family that includes TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). These tests simulate a hurricane’s debris strike, repeated pressure cycles, and pry-bar attack. This door family is built for that standard.
Design pressures are matched to your wind zone, up to +/-100, and never higher than you need. We don’t oversell a DP rating to sound impressive. The door gets engineered to your structure’s actual exposure, not a generic number pulled from a national chart.
Low-E and insulated glass options are available for thermal performance without sacrificing the impact rating. On a west-facing entry in Fort Pierce, that coating makes a real difference in afternoon heat gain, and it reduces condensation risk in cooled interiors.
Color & Glass Options
Fort Pierce has a particular architectural mix, from 1950s concrete block ranches near downtown to new coastal homes south of Fort Pierce Inlet and Mediterranean-inspired builds in Lakewood Park. The finish palette on these entry doors reflects that range.
White stays clean and classic on Spanish-style stucco and board-and-batten elevations. Black gives a sharp contrast on modern farmhouse and contemporary coastal homes, and it hides grime better than you’d expect in a salt-air environment. Bronze reads warm and substantial, an excellent match for terra cotta roofs, natural stone accents, or homes with oil-rubbed bronze hardware. The Paintable Woodgrain Finish is the practical choice if you want wood texture without wood maintenance; it takes exterior acrylic latex paint, so you can match your trim color exactly and repaint in ten years without replacing the door.
On the glass side, a Decorative Impact Glass Insert gives you privacy and pattern while maintaining the impact rating, useful for a front door facing a walkway or street. Low-E Insulated Glass is the pick for east- and west-facing entries in Fort Pierce, where morning and late-afternoon sun beats directly on the door. And a Solid Panel door suits whoever wants maximum thermal separation, zero glazing to clean, and the lowest possible maintenance.
Installation by TruePane Windows & Doors in Fort Pierce
An impact-rated entry door is only as good as the install. We’ve seen doors in Fort Pierce that passed product approval but failed in practice because they were set out of square, sealed with whatever foam was on the truck, or never properly flashed at the threshold. That’s a false economy, and it’s the main reason we install every door ourselves instead of subcontracting to a rotating crew.
Our process starts with a pre-install inspection of the rough opening. We check the existing buck, the subfloor condition at the threshold, and the wall plane the door will sit in. Then we dry-fit the door, shim it level, plumb, and square, and secure it through the reinforced jambs. Level and plumb are not optional, especially in older Fort Pierce homes where thirty years of settling has moved the opening out of true.
We seal the perimeter to AAMA 812 practice, using low-expansion foam around the jamb and a proper sealant at the sill and head. The installation itself follows AAMA 2400/2410 practice for fenestration installation. Then we water-test the threshold with a directed spray and adjust the sweep if we see any daylight or weep-through. We walk the door with you open-and-close, lock, key, and deadbolt before we pack up.
One more thing that matters in St. Lucie County: permits. If you’re in a coastal exposure zone or an HVHZ jurisdiction, your door replacement may require a permit and a product approval submittal. We know the Fort Pierce and St. Lucie County permitting flow, and we’ll flag it on the quote so there’s no surprise at the building department. Improper installation compromises an NOA-rated system, so do it once and do it right.
Frequently Asked Questions - Entry Doors
Design pressures are matched to your specific wind zone, up to +/-100, and never higher than needed. The exact DP rating on your door depends on your property’s exposure category and the door configuration (panel width, glass type, sidelite layout). We verify the correct Florida Product Approval and Miami-Dade NOA documentation for your address before you submit for permit. Call (772) 218-5890 for a verified rating on your specific opening.
Lead time depends on the configuration you choose. A standard single door with no glass or standard Low-E inserts usually ships within a few weeks. Custom paint finishes, decorative glass patterns, or unusual sizes add time. We set the lead time expectation in writing on your quote so you’re not left guessing. Call (772) 218-5890 and we’ll check current factory timelines on your preferred spec.
Yes, in most Fort Pierce and St. Lucie County permit situations, your permit package will include the Miami-Dade NOA and Florida Product Approval documents for your specific door configuration. We provide those documents with your quote, matched to the exact size, glass package, and frame material you’re ordering. Call (772) 218-5890 if you’re checking whether your door replacement triggers permit requirements.
Yes, within the product family’s max panel width of 48 inches. Single, double, sidelite, and transom configurations are all available. If your existing opening is an odd size, we measure first and build the door to the largest standard configuration that works without compromising the rough opening. Call (772) 218-5890 to schedule a measurement and see what fits your entry.
Wash the frame and door slab twice a year with a mild soap-and-water solution, and rinse the threshold track to keep the weep holes clear. Check the weatherstripping each fall, and if you have a paintable woodgrain finish, expect to repaint it every seven to ten years with a quality exterior acrylic latex. Lubricate hinges and the lock cylinder annually. If we installed the door, call us and we’ll advise on anything that looks off. Call (772) 218-5890.
Get a Quote - Entry Doors in Fort Pierce
We’re measuring and quoting entry doors across Fort Pierce, from the barrier island to Lakewood Park and everything off Orange Avenue. We’ll do a free on-site measurement, verify your wind zone and product approval path, and give you a line-item quote with the glass, finish, and hardware you actually want. Call (772) 218-5890 or stop by the shop to start.
Written by the team at TruePane Windows & Doors, serving Fort Pierce and the Treasure Coast with Florida-approved impact entry door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
