Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Sewall’s Point
Impact windows and doors in Sewall’s Point are not a luxury upgrade. They are the difference between a house that rides out a Category 4 and one that loses its roof to a patio door blowing in. The town sits on a narrow peninsula with the St. Lucie River on the west side and the Indian River Lagoon on the east. That means every elevation of your home takes salt air from two directions at once, all year. We replace and install hurricane-rated windows, sliding glass doors, entry doors, French doors, and garage doors for homeowners across Sewall’s Point, and we have been doing this kind of marine-environment work long enough to know what fails here first. Call (772) 218-5890 for a straight answer on what your house needs and what it will cost.
Salt Air Makes Sewall’s Point Different. We Build to That Standard.
Most impact window advice you read online could have been written about Orlando. Sewall’s Point is a different animal. The peninsula is fully encircled by saltwater. On mainland Stuart, a mile away, a house has a protected side, an elevation that does not face open water and does not take the brunt of wind-driven salt. Sewall’s Point has no protected side. North-facing windows corrode nearly as fast as the ones looking straight at the lagoon. West-facing door hinges seize even when the door face looks fine. The humidity stays high on all four elevations because the water is never more than a few hundred yards away in any direction. When we spec Impact Windows & Doors for a home here, we do not split the job into coastal and inland packages. Every opening gets marine-grade treatment. Every frame gets fusion-welded corners. Every hinge gets stainless steel. If you cut corners on the land side of the house, you will be back pulling corroded sashes out of the jambs inside eight years.
Why TruePane Windows & Doors Is the Right Fit for Sewall’s Point
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI. That matters in Sewall’s Point because the high-end custom homes here, many built between the 1960s and 1990s, demand premium impact-rated systems, not budget retrofits. Homeowners in this town expect French doors that swing true in July and window frames that do not bloom white corrosion after five seasons. That is exactly the standard Dale Kessler set when he founded TruePane in 2008. The founding rule is still on the whiteboard: if the pane is not true, the job is not done. Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you are buying and what each brand costs. And before the truck leaves your driveway, both manufacturer warranty layers are registered in writing, with durations stated. That is the Keystone Standard. No paperwork fights. No arguing. If something is not done right, we make it right for 90 days. That is the Done Right Promise. We have stood behind it on jobs from South Sewall’s Point Road to the riverfront properties along the west side of the peninsula. A live person answers our phone 24 hours a day, seven days a week. When you call (772) 218-5890, you get a person, not a voicemail tree.
Our Impact Windows & Doors Services in Sewall’s Point
Hurricane Impact Windows
A typical impact window replacement in Sewall’s Point runs $900 to $2,400 per opening, depending on size, frame material, and glass package. The homes here skew custom, so we handle a lot of oversized fixed panes, radius tops, and arched transoms that are not stock sizes. We spec fusion-welded aluminum or vinyl frames with stainless hardware as standard because the all-direction salt exposure here is harder on frames than anything on the mainland. Our Sewall’s Point installs include full flashing tape over sealed joints, stainless steel fasteners, and both warranty layers registered before we leave.
Impact Sliding Glass Doors
Sliding glass doors on Sewall’s Point take abuse from two directions: wind-load pressure from Atlantic storms and salt-laden humidity from the rivers that box the town in. We replace original sliders with impact-rated, multi-point locking systems that meet Florida High-Velocity Hurricane Zone standards. Stainless steel rollers and tracks are non-negotiable here. Mild-steel rollers seize within a decade, even on doors that look fine from the living room. A typical impact slider for a 12-foot opening runs $4,500 to $9,000 installed, depending on glass package and frame finish.
Impact Entry & French Doors
French doors are the most common failure point we see on older Sewall’s Point homes, particularly the 1970s and 1980s custom builds that still have their original doors. The hinges seize. The sashes fuse to the jambs from salt creep. The door face often still looks presentable, which fools homeowners into thinking the door is fine. On a 1980s custom home off South Sewall’s Point Road, our crew pulled original aluminum single-pane double-hungs whose sashes had fused to the jambs on all four elevations, including the north side. We replaced them with fusion-welded impact-rated frames and stainless steel hinges on every French door. The customer was surprised the north-facing windows were just as pitted as the ones facing the lagoon. Impact entry and French door replacement in Sewall’s Point typically runs $2,800 to $7,500 per door, depending on glass, hardware, and whether the rough opening needs reframing.
Impact Garage Doors
Garage doors on the peninsula are a structural liability in a storm. A non-impact garage door that gives way lets wind pressure inside the house, and that is how roofs come off. We install impact-rated garage doors with reinforced tracks and struts, sized for the wind zone Sewall’s Point sits in. Typical replacement runs $2,200 to $5,800 depending on door width, material, and motor. We also handle Wind Mitigation & Code Compliance paperwork for Sewall’s Point homeowners, including the inspections and documentation that help keep your insurance premium from climbing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Stock and Service in Sewall’s Point
We are authorized to install PGT, CGI, Jeld-Wen, and Simonton, among more than a dozen lines. Most Sewall’s Point homeowners spec PGT or CGI because the high-end market here expects premium impact ratings and those two brands have the test data to back them. We keep common replacement parts and hardware for these brands available so we are not waiting two weeks on a hinge or a sash lock. If you are comparing quotes, ask to see manufacturer lines side by side on paper. We will show you the same thing we show every customer: what each brand costs, what the warranty covers, and how long the warranty runs. That is the square deal.
Common Impact Windows & Doors Problems We See in Sewall’s Point Homes
- Aluminum frame corrosion on non-water-facing sides. Salt-laden humidity from the encircling rivers sits on north and west elevations constantly, so frames develop white corrosion bloom even without direct spray. If you wait until the frame pits through, the glass package starts losing its seal.
- Fused sashes and seized operators. Single-pane original windows from 1960s to 1990s builds often have sashes that will not move. Salt creep builds up in the tracks and on the friction surfaces. By the time the window will not open, the frame is usually too far gone to rebuild.
- Failed seals and fogging inside 8 to 12 years. The original insulated glass units on these older homes were not built for constant saline humidity. Salt deposits accelerate seal degradation, so argon leaks and condensation appears far earlier than the typical 20-year lifespan you would see inland.
- Mild-steel door hinges and rollers snapping or seizing. French doors and sliding doors look fine from the inside, but the hardware is often original mild steel. In Sewall’s Point, that hardware fails within a decade even when the door face is structurally sound. We replace it with stainless steel as standard.
Pricing for Impact Windows & Doors in Sewall’s Point, FL
We Also Serve Cities Near Sewall’s Point
Our crews cover Sewall’s Point and the surrounding Martin and St. Lucie County communities, including Fort Pierce, Fort Pierce South, White City, and South Beach. Scheduling is coordinated from our South Florida office, and the teams that serve Impact Windows & Doors in Sewall’s Point are the same local crews working these neighboring towns. If you are a few minutes off the peninsula, the marine-spec standards do not change.
Serving Sewall’s Point, FL - Our Local Coverage Area
We’re based in the Sewall’s Point area and offer Custom Windows & Doors in Sewall’s Point, and we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Sewall’s Point
Why do my north-facing impact windows in Sewall’s Point corrode as fast as the ones facing the lagoon?
Because the peninsula is fully encircled by the St. Lucie River and the Indian River Lagoon, salt-laden humidity stays elevated on all four elevations of your house year-round. There is no protected side. North and west-facing frames corrode at nearly the same rate as the water-view side, which surprises homeowners who assumed the land side was safe. Call (772) 218-5890 for a free inspection if you see white corrosion bloom on any frame.
Can I just spec cheaper impact windows on the ‘land side’ of my Sewall’s Point home to save money?
You can, and some contractors will write that bid. We will not. On this peninsula, the land side takes nearly the same salt load as the water side, just from humidity rather than direct spray. The cheaper inland-spec frames and mild-steel hardware fail within eight to twelve years here, and then you pay for replacement twice. The marine-grade package adds 15 to 25 percent to the bid and lasts decades longer. That is the honest accounting.
What brands do you install for Sewall’s Point homes that demand premium impact ratings?
We are an authorized installer for more than a dozen lines, and for Sewall’s Point we most often quote PGT and CGI because their test data and High-Velocity Hurricane Zone ratings match what this market expects. We also carry Jeld-Wen and Simonton for homeowners who want to compare frame profiles and glass packages. We quote all lines side by side on paper so you see exactly what you are buying and what it costs.
Do impact windows in Sewall’s Point require different flashing or sealing than a normal coastal job?
Yes. The continuous elevated humidity and multidirectional salt air means we spec exterior flashing tape over every sealed joint, stainless steel fasteners, and fusion-welded frame corners as standard. Many installers use standard flashing and coated steel hardware, which is fine inland but fails early here. The labor detail is not visible after the trim goes up, but it is the difference between a 10-year install and a 30-year install.
How do I know if my existing windows in Sewall’s Point are beyond repair and need replacement?
If the sashes are fused, the frames show pitting or white corrosion bloom, the glass is fogging from failed seals, or the hardware is seizing, the unit is typically past economical repair. On this peninsula, original 1960s to 1990s aluminum single-panes are almost always beyond rebuilding by the time homeowners notice the problem. We can come out and tell you straight what is repairable and what is not. Call (772) 218-5890 to schedule a free estimate, and we will give you the honest answer either way.
Contact TruePane for Impact Windows & Doors in Sewall’s Point
If you live on the peninsula, you already know the salt air does not give your house a day off. The windows and doors that came with your home were not built for it, and the cheap retrofits are not either. We spec every Sewall’s Point job to marine-grade standards whether the opening faces the lagoon or the street. The Keystone Standard means both warranty layers are registered in writing before our truck leaves your driveway. The Done Right Promise means we make it right if it is not. Since 2008, Dale Kessler’s founding rule has been the same: if the pane is not true, the job is not done. Call (772) 218-5890 for your free written estimate. A person answers.
Written by Dale Kessler, Owner at TruePane Windows & Doors, proudly serving Sewall’s Point since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After