Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Port Salerno
If you live in Port Salerno and your windows are original to a 1960s or 70s fishing cottage, you’re likely facing a full-frame replacement, not a glass swap. That’s the plain truth of what Martin County code requires here, and it catches a lot of homeowners off guard. We’ve worked enough homes off Sunset Drive, Salerno Road, and along the Manatee Pocket to know the drill before we even pull the first sash. Call (772) 218-5890 and a live person answers. We’ll schedule a free estimate, measure every opening twice, and show you on paper exactly what a compliant quote includes and what a cheap one leaves out.
Why TruePane Windows & Doors Is Port Salerno’s Preferred Window Replacement Company
We’ve been doing Window Replacement work across Martin County long enough to know that Port Salerno is its own animal. The salt air off the Manatee Pocket doesn’t behave the same way it does three miles inland in Palm City. Frames corrode faster here. Flashing fails sooner. The homes are older, and most of them were built before impact-rating was a word anyone used. Our crews see that on every other job, and we plan for it before we quote.
Dale Kessler founded TruePane with a rule that’s still on the whiteboard: if the pane is not true, the job is not done. That applies to the glass, the frame, the flashing, and the paperwork. We hire locally, train our own apprentices into journeymen, and our technicians are background-checked and uniformed. They work in your home the way they’d work in their own mother’s. We don’t hand you a voicemail tree, and we don’t route calls to a regional center. A live person answers the phone 24 hours a day, seven days a week. Call (772) 218-5890 and you’ll get a person, not a recording.
Port Salerno homeowners tell us the same thing over and over: they had a bid that looked fine until the inspector flagged the jalousie windows, or the reused frames failed the pull-out test, or the flashing wasn’t tied into the block. We quote it right the first time because we know what the Martin County inspector will check before we even start pulling permits.
Our Window Replacement Services in Port Salerno
Full Frame Replacement
Most homes in Port Salerno need this, whether the homeowner realizes it yet or not. Full frame replacement means we pull the entire window down to the rough opening, inspect the concrete-block or wood framing for salt damage, install new impact-rated units with reinforced jamb anchors, flash every side with butyl tape, and tie the assembly into the existing structure before the inspector ever looks at it. In Port Salerno, this is almost always driven by code: jalousie and single-pane aluminum windows from the 1950s through 1970s cannot be retrofitted to meet the 150 mph design wind speed that the St. Lucie Inlet proximity imposes under the Florida Building Code. Every open permit on one of these homes triggers the full-frame requirement. We know that going in, and we quote accordingly.
Insert Window Replacement
Inserts make sense only when the existing frames are still structurally sound. Here’s the catch in Port Salerno: decades of salt spray from the Manatee Pocket have oxidized a lot of those original aluminum frames past the point of reuse. They fail pull-out tests. They hide corrosion behind caulk. We measure every opening twice and inspect the frame condition before we recommend an insert. If the frame is true, an insert saves you money and time. If it isn’t, we’ll tell you on the spot and quote the full-frame option side by side on paper, with both prices in writing. No surprises later, no second trip to “discover” what we should have caught the first time.
Storm Window Replacement
Storm windows get pitched to Port Salerno homeowners as a cheaper alternative to impact-rated units. They are not a substitute, and here’s why. Martin County code does not accept exterior storm panels as the primary line of defense on an open permit for a replacement window job in this area. A storm window over a single-pane aluminum frame that’s already compromised by salt corrosion is still a failed assembly. The wind-load math doesn’t change because you added a second piece of glass on the outside. We’ll install storm windows where they genuinely work: as a secondary layer on newer, already-rated units, or as a privacy and acoustic treatment in windows that don’t face permit scrutiny. But if a contractor in Port Salerno tells you storm windows are all you need to pass inspection, get a second opinion. Ours is free.
Energy-Efficient Upgrade
Port Salerno’s waterfront position means two things for energy bills: relentless sun exposure and constant humidity. Original single-pane aluminum windows conduct heat straight through the frame, and failed seals let that salt-laden moisture inside the wall cavity where it feeds rot you can’t see. We upgrade with Low-E glass packages and thermally broken frames, which cut solar heat gain and stop the frame from sweating. For concrete-block cottages near the water, we also recommend upgraded anchoring and a full re-flash because the energy savings don’t mean much if wind-driven rain is wicking in behind the siding. A typical energy-efficient full-frame upgrade in Port Salerno runs $900 to $1,800 per opening depending on size, glass package, and frame condition.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port Salerno
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For impact-rated work in Port Salerno, we often quote ECO Window Systems and Simonton side by side because their wind-load ratings and anchoring systems play well with older concrete-block construction. For homeowners who want a clean, modern line on a cottage renovation, ViewLux is a frequent choice. The important part is that we quote these manufacturer lines on paper, side by side, with both warranty layers registered in writing before the truck leaves your driveway. You see exactly what you’re buying, what it costs, and how long the warranty runs. No vague hand-waving about “premium glass.”
Common Window Replacement Problems We See in Port Salerno Homes
- Salt corrosion on original aluminum frames. The Manatee Pocket’s constant salt spray oxidizes aluminum faster than anywhere a few miles inland. We routinely pull frames off Sunset Drive and Salerno Road homes that are pitted to the point of structural failure, even when the glass itself looks fine. Reusing those frames under an impact-rated retrofit is a guaranteed failed inspection.
- Jalousie windows triggering full-frame retrofit requirements. Port Salerno still has a lot of original louvered jalousie windows, especially in 1960s fishing cottages. They cannot be made impact-rated. Martin County inspectors flag them on any open permit, which forces a full replacement even when the homeowner thought they were only doing a partial door or one-window job.
- Cheap quotes that omit flashing and anchoring. Wind-driven rain off the Manatee Pocket is not a gentle mist. It pushes water sideways, and if the new impact-rated window isn’t properly flashed and tied into the block anchorage, water intrusion rots the framing from the inside out. We’ve opened walls on Port Salerno homes where the previous contractor skipped butyl tape entirely. The final pressure test failed, and the homeowner paid twice.
- Fogged or failed seals from humidity and salt. A window that fogs between the panes is telling you the seal is dead. Near the Pocket, that failure comes faster because salt-loaded air is hard on dual-pane assemblies. If you see fogging or condensation inside the glass on a Port Salerno morning, the unit needs to come out, not get wiped down.
Pricing for Window Replacement in Port Salerno, FL
Here’s what Port Salerno homeowners should expect. A basic insert replacement on a structurally sound frame runs $650 to $1,200 per window. A full-frame impact-rated replacement, which is what most of Port Salerno’s older cottages require, runs $900 to $2,400 per opening depending on size, glass package, and anchoring complexity. Storm windows as a secondary layer run $250 to $600 per window. A whole-house energy-efficient upgrade on a 3-bedroom cottage typically falls between $12,000 and $28,000. These are real ranges based on the homes we’ve quoted in this area. Your exact price depends on frame condition, opening size, and how much salt remediation the existing framing needs. Call (772) 218-5890 for a free estimate, and you’ll get a written line-item quote. Not a ballpark. Not a handshake. A number on paper.
| Service Type | Typical Port Salerno Price Range |
|---|---|
| Insert Replacement (sound frame) | $650 - $1,200 per window |
| Full-Frame Impact-Rated | $900 - $2,400 per opening |
| Storm Window (secondary layer) | $250 - $600 per window |
| Whole-House Energy-Efficient Upgrade | $12,000 - $28,000 |
Every quote includes both manufacturer warranty layers registered in writing and our Done Right Promise. If it’s not done right, we make it right. No paperwork fights. No fine print that covers neither. That’s the Keystone Standard, and it applies to every Port Salerno job.
We Also Serve Cities Near Port Salerno
Our crews work Window Replacement in Port Salerno every week, and we regularly take jobs in Stuart, Hobe Sound, Palm City, and Jensen Beach. The code requirements shift slightly from one Martin County community to the next, but our approach doesn’t: measure twice, quote on paper, register the warranties, and stand behind the work. If you’re just outside Port Salerno, call and ask. We’ll tell you straight whether we’re the right crew for your street.
Serving Port Salerno, FL - Our Local Coverage Area
We’re based in the Port Salerno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Port Salerno
Replacement windows in Port Salerno must meet a 150 mph design wind speed under the Florida Building Code, driven by the St. Lucie Inlet’s proximity and the exposed waterfront position of most of the community. That means impact-rated assemblies with proper anchoring, not glass alone. The rating has to come from the entire unit as tested: frame, glass, and anchorage together. Call (772) 218-5890 and we’ll show you which tested systems meet that requirement for your specific opening sizes.
No, not without running afoul of Martin County inspectors on any open permit. Jalousie windows in Port Salerno cannot be made impact-rated, and the county will flag them the moment a permit involves that opening. Replacing one pane in place is a temporary repair at best, and it doesn’t solve the code problem. The honest answer is that jalousie windows need full replacement with compliant impact-rated units. We can quote that for you with no pressure and no obligation.
The Manatee Pocket’s salt spray is constant and concentrated. Aluminum doesn’t rust the way steel does, but it oxidizes aggressively in a marine environment, pitting the surface and weakening the extrusion. After forty or fifty years of that exposure, the frames lose structural integrity. That’s why we inspect before we recommend inserts. Reusing a salt-compromised frame under an impact-rated retrofit is a failure waiting for the inspector’s pressure test.
A compliant quote for a Port Salerno waterfront home should include full-frame replacement with impact-rated units, reinforced jamb anchors tied into the existing concrete-block or wood framing, butyl flashing tape around every opening, a written wind-load rating for the exact model quoted, both manufacturer warranty layers registered in writing, and the permit and inspection schedule. If a quote omits flashing, anchoring details, or the wind-load documentation, it’s not compliant. Call (772) 218-5890 for a free written estimate that includes every one of those items.
You can, but it won’t pass a Martin County inspection on an open permit, and it won’t bring your home into code compliance. Storm windows over single-pane aluminum frames are not accepted as the primary line of defense because the underlying frame and anchorage still fail the wind-load requirements. The honest move is to replace the window correctly with an impact-rated unit. We’ll tell you if storm windows are useful as a secondary layer in your specific situation, and we’ll be straight if they’re not.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port Salerno with craft-driven window and door work since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.