Simonton Door Installation Nationwide | TruePane Windows & Doors

Simonton Door Installation in Fort Pierce: What to Know First

We install Simonton doors in Fort Pierce as an independent service provider, not a manufacturer affiliate. Most Simonton door installations take one to two days on site, depending on what the opening reveals once the old unit comes out. Honest price posture: you’ll pay more than a handyman quote and less than a full custom millwork job, usually between $450 and $1,800 for labor on a standard Simonton door install, with the door itself priced separately. This page is for Fort Pierce homeowners who already own or are buying a Simonton door and want it set correctly the first time. Call (772) 218-5890 to talk through what you have.

Call (772) 218-5890

How Simonton Products Fail - and How We Fix Them

Simonton builds a solid mid-range door and window. But every product line has weak points, and Fort Pierce humidity plus salt air finds them faster than most climates. Here’s what we see on Simonton door installations in this area:

• Simonton hinged patio door sill rot at the threshold. The older Simonton 5300 and 5400 series hinged doors used aluminum sills with weep holes that clog with fine Fort Pierce sand and oak pollen. Water backs up, sits against the wood frame, and rots the subfloor before you see it. Our fix is pulling the door, inspecting the rough opening, replacing any compromised framing, and setting the new unit on a properly sloped waterproof sill pan.
• French door astragal misalignment on Simonton 6500 series. The active leaf drifts over time because the original installers shimmed the hinge side but left the astragal bolt loose. In Fort Pierce’s humidity swings, the wood expands and contracts, and the door binds at the top corner by July. We reset the hinges, re-shim the frame square, and align the astragal so both leaves close without dragging.
• Fogged glass on Simonton Reflections and Impressions patio doors. The insulated glass units in these lines carry a 20-year manufacturer warranty, but the seal only fails early when the original install put pressure on the glass from an out-of-square frame. We order the replacement IGU directly through Simonton’s warranty channel and set it in a frame that’s been corrected first, so you don’t repeat the failure.
• Roller and track wear on Simonton sliding glass doors. The Simonton 6100 and 6300 sliders use nylon rollers that flatten after ten to twelve years of Fort Pierce sand working into the track. Symptoms are a door that groans, jumps, or needs two hands to move. We replace rollers and adjust the track, but if the track itself is pitted from salt corrosion, we’ll tell you before quoting a band-aid fix.
• Improper flashing on new construction Simonton entry doors. We regularly see Simonton entry doors in Fort Pierce homes built in the 1990s and 2000s that were set with no sill pan and only a bead of caulk at the top. The first wind-driven rain from the Atlantic finds the gap. Our installation uses a full flashing system, including sill pan, jamb flashing, and head flashing integrated with the house wrap.

Our Simonton Door Installation Process

We treat every Simonton door installation as if the opening has something to hide until proven otherwise. Here’s how a typical job runs:

1. 1
   Call and schedule a site visit. We come to your Fort Pierce home, measure the rough opening, check for level and plumb, and look at what’s behind the trim. We quote the door and the labor separately, on paper.
2. 2
   Diagnose before demo. If there’s an existing door, we identify why it failed before we remove anything. That tells us what the new install has to overcome.
3. 3
   Parts decision. We use Simonton OEM hardware and weatherstripping on warranty-covered work. For out-of-warranty repairs, we’ll offer you a choice: OEM at full price or a quality aftermarket equivalent that fits without modification, with the price difference stated clearly.
4. 4
   The installation. We strip the opening, repair any framing damage, set the sill pan, flash properly, and set the new Simonton door square and level. Every measurement is checked twice. We shim at stress points, not just wherever the gap is convenient.
5. 5
   Test and tune. We open and close the door fifty times in front of you. If it binds, drags, or doesn’t seal, we adjust before we caulk. The caulk goes on last, only after the door operates correctly.
6. 6
   Warranty registration and cleanup. We register both manufacturer warranty layers in writing and hand you the paperwork before the truck leaves your driveway. We haul off the old door and leave the opening cleaner than we found it.

What Simonton Door Installation Costs in Fort Pierce

Here’s how the numbers break down in Fort Pierce right now, based on the Simonton doors we install most often for local homeowners:

• Simonton hinged patio door swap (labor only): $450-$850, depending on rot repair and exterior finish work.
• Simonton French door installation, pre-hung: $700-$1,200, including flashing and trim.
• Simonton sliding glass door replacement: $600-$1,500, more if the track or framing needs to be rebuilt.
• Simonton entry door with side lites: $900-$2,200 for labor, depending on the complexity of the lite installation and any brickwork.

The price moves when the rough opening has been water-damaged, when the existing door was set out of square and needs corrective framing, or when Fort Pierce’s older concrete block construction requires specialty anchors. You’ll get a written line-item quote before any work begins, and the price won’t change unless the opening reveals damage nobody could have seen from the outside. If that happens, we stop and call you. Call (772) 218-5890 to schedule a free estimate.

Why Fort Pierce Homeowners Call TruePane Windows & Doors for Simonton Work

We’ve been doing this in Fort Pierce long enough to know which Simonton models fail, why they fail, and how to fix them so they don’t fail again. Dale Kessler grew up off Okeechobee Road on the north side of town and learned the trade at Indian River State College, working alongside his father on residential glass and doors up and down the Treasure Coast. We bring that same standard to every Simonton installation: the Done Right Promise means if the door isn’t right, we come back and make it right, with no paperwork and no argument. If you’re comparing options and also considering Andersen, Pella, or PGT, we’ll quote those side by side on paper so you can see exactly what each line costs and what you’re getting. We stand behind every Simonton door we set, and we’ll still be answering the phone in thirty years.

FAQs