Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Impact Windows & Doors in Fort Pierce: What to Know First
We provide independent CGI impact window and door service, repair, and replacement in Fort Pierce, and most CGI jobs are completed in a single visit. You’ll get a written line-item quote before any work begins, and the price we quote is the price you pay. If you own CGI windows or doors in Fort Pierce and something isn’t operating right, call (772) 218-5890 and a live person will answer.
This page is for homeowners who already have CGI impact windows and doors, or who are considering them, and want to understand what goes wrong, what fixes cost, and who in Fort Pierce actually knows how to work on them. As an independent CGI service provider, we’re not tied to any single manufacturer’s line, but we’ve repaired and replaced enough CGI product on the Treasure Coast to know its habits.
How CGI Products Fail - and How We Fix Them
- Sagging panels on CGI Estate Collection sliding doors. The Estate line uses a heavier extruded aluminum frame, and over ten or fifteen years, the rollers wear unevenly against the bottom track, especially on south-facing exposures in Fort Pierce where salt air works into the roller housings. The door gets stiff, then starts dragging, then binds. We replace the rollers with the correct OEM spec, clean and realign the track, and reset the panel height so the door glides without lifting.
- Clouded glass in CGI Targa series fixed windows. The Targa line is common in Fort Pierce homes built after 2005, and its insulated glass units occasionally lose their seal due to thermal cycling between the afternoon heat and air-conditioned interiors. You’ll see fog or a milky film between the panes that won’t wipe off. The fix is an IGU replacement matched to the original sightlines, done without pulling the frame.
- Stiff or seized operators on CGI casement windows. The operator arms on CGI casements use a zinc alloy gear that corrodes over time in Fort Pierce humidity, especially in homes near the river or inlet. If the crank spins without moving the sash, or you hear grinding, the gear has stripped. We replace the operator with the correct OEM part and lubricate the hinge points, which usually brings the window back to smooth operation.
- Worn weather stripping and worn corner keys on CGI frameless impact windows. Frameless windows rely on rubber gaskets to seal and corner keys to stay square. After years of exposure, the gasket compresses and the corner keys develop play, which lets air and water in around the edges. We replace the gaskets with factory-spec material and re-key the corners before resealing the frame.
- Failed impact glass after a storm or blunt impact. CGI impact glazing is designed to crack but hold, and that’s exactly what it does. When a laminated pane takes a hit and shows spiderwebbing, it has done its job. We replace the pane with the matching laminated impact-rated glass and recertify the opening, so the window doesn’t just look fixed but actually meets code again.
Our CGI Impact Windows & Doors Process
- 1
You call and a live person answers. No voicemail tree. We ask what the window or door is doing, or not doing, and we schedule a time that works.
- 2
We measure the opening twice. Every opening. Dale Kessler’s rule from his father’s shop holds: measure twice before you order anything.
- 3
We diagnose and quote on paper. We identify the exact CGI model line and the failure, then give you a written line-item quote showing OEM vs. quality aftermarket parts side by side, with the warranty on each stated plainly.
- 4
We fix it right the first visit. Most CGI repairs in Fort Pierce are completed in a single visit, with the correct parts and no surprise line items on the bill.
- 5
We test before we leave. We cycle the window or door, check the seal, and verify the operation. If it doesn’t hold, we don’t leave.
- 6
We register both warranty layers in writing before the truck pulls out. The Keystone Standard means you get durations stated and paperwork done, not promised.
What CGI Impact Windows & Doors Costs in Fort Pierce
CGI repair and replacement pricing in Fort Pierce varies by the model line and the failure, but here’s what we typically see:
- Roller replacement on a CGI sliding door: $220 to $480 depending on panel count and track condition.
- IGU replacement for a fogged CGI fixed window: $340 to $720 depending on size and glass specification.
- Operator replacement on a CGI casement: $180 to $300 per window.
- Full weather stripping and corner key service on a frameless impact window: $140 to $260 per opening.
- Impact glass pane replacement after a crack or impact: $500 to $1,300 per pane depending on size and lamination spec.
What moves the price is the size of the opening, the specific CGI series, whether the glass is a low-E laminate, and whether we’re matching existing sightlines or starting fresh. We quote fixed pricing in writing before the work starts. No change orders. Call (772) 218-5890 for a free estimate on your specific CGI window or door.
Why Fort Pierce Homeowners Call TruePane Windows & Doors for CGI Work
The name on the window matters less than the hands that set it. We’ve served Fort Pierce and the Treasure Coast since 2008 through a craft tradition that started with Dale Kessler’s father and continues with Dale leading our team. Our technicians are background-checked and uniformed, and they know CGI product lines because they’ve worked on them, not because they read a brochure. If a CGI part is backordered or discontinued, we can quote you an equivalent from PGT, Andersen, Pella, or ViewLux side by side on paper so you can see exactly what you’re buying.
Every CGI job we touch is covered by our Done Right Promise: if it isn’t done right, we make it right, no paperwork and no arguing. That’s not a marketing line. That’s how Dale has run TruePane Windows & Doors since 2008. Call (772) 218-5890 and you’ll get a real person, not a call center, who can talk CGI windows and doors in the same language we’ve used on job sites around Fort Pierce for four decades.
FAQs
No, not when the work is done correctly. CGI’s warranty covers manufacturing defects in materials and workmanship, but improper installation or repair can void coverage. We register both warranty layers in writing before the truck leaves the driveway, and we track CGI’s current warranty terms so we don’t do anything that would put your coverage at risk. Call (772) 218-5890 with your specific window or door and we’ll walk through what’s covered.
Most common CGI replacement parts, like rollers, operators, and weather stripping, are in our inventory or available within a few days. Custom glass orders and replacement IGUs for impact-rated windows typically take two to four weeks depending on the laminate specification. If a part is discontinued, we’ll quote a compatible equivalent on paper so you’re never left waiting without options. Call (772) 218-5890 for a current lead time on your specific repair.
If the frame is square and the failure is isolated, like a fogged IGU or a worn operator, repair is usually the right call and typically costs a fraction of replacement. If the frame has corrosion, the corner welds are failing, or multiple openings have failed in the last few years, replacement may make more sense over the long run. We’ll quote both paths side by side in writing so you can decide based on numbers, not guesswork. Call (772) 218-5890 and we’ll come take a look.
Yes. CGI uses specific paint and anodize finishes across its model lines, and we match your existing colors and sightlines when replacing glass or adding new openings. If you’re adding a window to match ones you already have, we’ll quote the closest CGI equivalent and show you a physical sample before ordering. Call (772) 218-5890 to schedule a free estimate.
We do, and we see it regularly in Fort Pierce. If another installer set the window out of square or left the seal incomplete, the fix still follows the same process: measure, diagnose, repair in writing, and stand behind it. Dale Kessler keeps one rule on the whiteboard: if the pane is not true, the job is not done. Call (772) 218-5890 and we’ll put that rule to work on your windows.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Pierce and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.