Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterVLX 80 Awning Window in Fort Pierce, FL | TruePane Windows & Doors
The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, letting you run ventilation even during a Florida afternoon downpour. Rain hits the glass and slides off while fresh air flows in through the sides. TruePane Windows & Doors is an authorized ViewLux installation partner serving Fort Pierce and the Treasure Coast, which means you get the factory product installed by a local crew that answers the phone. Whether you’re replacing corroded single-pane windows in a 1970s concrete-block home near South Beach or spec’ing windows for new construction in Lakewood Park, this window handles humidity, salt air, and storm season without rotting, swelling, or sticking. Call (772) 218-5890 for pricing and availability in Fort Pierce.
Product Overview - VLX 80 Awning Window
The VLX 80 is built around one simple idea: a window that vents in the rain. Because it’s hinged at the top and opens outward, the sash itself becomes a small awning over the opening. Fort Pierce gets roughly 55 inches of rain a year, much of it in quick summer storms. An awning window lets you keep air moving without scrambling to close every opening when the sky opens up. That alone explains why we install so many of these in kitchens, bathrooms, and laundry rooms along Indian River Drive and down toward South Beach.
The frame is extruded aluminum with a 1.97-inch profile width, which is slim enough to look contemporary but deep enough to hold serious hardware and glass. Aluminum doesn’t absorb moisture, doesn’t warp in humidity, and doesn’t become termite food. The thermal break built into the frame separates the interior and exterior metal so heat doesn’t conduct straight through the extrusion. In a Fort Pierce summer, that matters. Without a thermal break, an aluminum frame in direct sun gets hot enough to feel like a radiator on the inside wall.
Awnings are popular in horizontal ribbons of windows placed high on a wall, where they preserve privacy while pulling hot air out near the ceiling. They also pair well with fixed picture windows, giving you a large view with small operable vents at the top or bottom. We’ve installed that exact combination in mid-century ranches in Riverview Park and in newer stucco homes in Tradition where homeowners want clean lines without sacrificing airflow.
Technical Specifications
The VLX 80 is a residential-grade aluminum awning window, not a commercial storefront product, but it borrows commercial engineering where it counts. Here’s what the spec sheet looks like in plain language.
- Frame material: Extruded aluminum with thermal break
- Main wall thickness: 0.079 inches, giving the extrusion rigidity without excess weight
- Profile width: 1.97 inches overall frame depth
- Operation: Top-hinged awning, outward opening
- Glass types: Clear, Frosted, Low-E, Tempered, Laminated
- Frame finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
- Screens: Fixed screen mounted on the interior, or a retractable screen option
- Hardware: Multi-point locking handle with corrosion-resistant components
- Compliance: AAMA 2400/2410 installation standards, NFRC-rated thermal performance
Every unit is fabricated to the opening size you need. No stock sizes, no shimming a 36-inch window into a 34-inch rough opening. You order the size, we measure, ViewLux fabricates, TruePane installs.
Performance Features
Thermal Efficiency – The thermal break in the VLX 80 interrupts conductive heat transfer through the aluminum. With Low-E glass paired to that break, the window carries an NFRC-rated U-factor and solar heat gain coefficient that make a measurable difference on a Fort Pierce electric bill. In August, the west-facing windows are the enemy; this product reduces that afternoon heat gain.
Acoustic Performance – Fort Pierce has noise, like most Florida towns: US-1 traffic, trains near the FEC tracks, lawn crews at dawn. Laminated glass in the VLX 80 cuts mid- and high-frequency sound noticeably. Streets closer to Orange Avenue benefit more than quiet blocks in White City, but the option exists regardless of where you live.
Airtightness & Weather Seal – The awning’s compression seal design gets tighter as wind presses against the closed sash. Unlike a sliding window, which struggles to seal under wind load, the VLX 80 actually improves its seal. That’s a real advantage in a coastal market where afternoon thunderstorms push gust fronts across the Indian River Lagoon.
Waterproofing – The top hinge design and continuous perimeter gasket shed water outward and down. The drainage path is built into the frame, not dependent on a bead of caulk. When installed per AAMA 2400/2410 with low-expansion foam at the perimeter, the wall around the window stays dry year-round.
Wind Resistance – Miami-Dade and Florida Building Code wind-load requirements are not suggestions in Fort Pierce. The VLX 80 is wind-load rated for local code requirements, and the impact-resistant laminated glass option brings it up to hurricane-impact standard when the project calls for it.
Security & Hardware – Awning windows are hard to force open from outside because the sash presses into the frame when pulled. The multi-point lock on the VLX 80 engages at multiple points along the sill, distributing force. On a back window facing an alley or canal, that’s a meaningful difference.
Color & Glass Options
Six finishes give you room to match nearly any exterior palette. Premium Black is the go-to for modern builds and has become the standard in new construction across Fort Pierce, especially paired with white stucco or light brick. Pure White suits traditional Florida ranch homes and older neighborhoods like Lakewood Park where white window trim is the neighborhood vernacular.
Anodized Silver hides salt spray and oxidation better than any painted finish; if you’re within a half mile of the Indian River Lagoon, it’s worth considering. Bronze and Champagne both look right on mid-century homes, especially with terrazzo or wood-look tile indoors. The Teak Wood finish reads as warm and organic from the street, giving aluminum the look of wood without the maintenance. It’s a favorite for coastal-style homes south of Fort Pierce toward Jensen Beach.
On glass: Clear for maximum light, Frosted for bathrooms and side yards where privacy matters, Low-E for UV protection and heat rejection (recommended on east- and west-facing walls), Tempered for code-required safety glazing near doors and floors, and Laminated for impact resistance and sound deadening.
Installation by TruePane Windows & Doors in Fort Pierce
An excellent window installed badly is still a bad window. That’s not marketing fluff; it’s the most common reason aluminum windows fail prematurely in Florida. Water gets behind the frame, rot starts in the rough opening, and the window gets blamed for a problem it didn’t create. ViewLux warranties cover manufacturing defects. They do not cover failures caused by poor installation. That’s the gap TruePane Windows & Doors exists to close.
Our Fort Pierce window crews install the VLX 80 to AAMA 2400/2410 standards, which govern proper installation practices for windows in residential construction. Every opening gets inspected before the new window goes in: stud condition, existing flashing, signs of hidden water damage, and rough-opening dimensions. If we find rot in a Fort Pierce home, you hear about it before the new window goes in, not after it’s too late.
The window is set level, plumb, and square. No fudging a 1/8-inch out-of-square opening; we correct the framing first. The perimeter joint gets low-expansion foam sealant meeting AAMA 812 requirements, which seals the gap without bowing the frame. That’s critical with aluminum. Over-expanding foam distorts the extrusion and causes the sash to bind. We finish with an exterior-grade sealant joint and run a water test before final cleanup. You don’t see a caulk line that looks like it was applied by a rushing apprentice, and you don’t find sawdust in your living room after we leave.
Fort Pierce brings specific challenges: salt-laden air near the coast, high humidity, and building codes shaped by Miami-Dade protocols. Our crews live and work in this climate, which means we understand what fails here and install accordingly.
Frequently Asked Questions - VLX 80 Awning Window
Lead time runs 3 to 5 weeks depending on glass selection, finish, and the production queue at the ViewLux facility. Laminated and Low-E options occasionally add a few days. If you’re planning around a specific date, call (772) 218-5890 before ordering and we’ll confirm current production timelines for your Fort Pierce project.
Potentially yes. Eligibility under current federal energy-efficiency tax credit programs depends on the specific glass package, U-factor, and solar heat gain coefficient of the exact unit you order. We can run the NFRC numbers on your build before you commit and give you a straight answer. Call (772) 218-5890 and we’ll price both qualifying and non-qualifying configurations.
ViewLux provides a manufacturer’s warranty against defects in materials and workmanship, including frame and glass coverage. Finish warranty terms vary by color choice, and the thermal-break and hardware carry their own terms. Installation by TruePane Windows & Doors is performed to AAMA standards so your warranty remains valid. We’ll provide documentation at installation.
Yes. The VLX 80 is fabricated to your opening dimensions rather than sold in stock increments. Common widths run 24 to 48 inches, with heights typically 18 to 36 inches, but any opening within structural limits can be built. We measure every Fort Pierce opening ourselves before ordering, which removes the guesswork from your order.
Wash the frames twice a year with mild soap and water, and wipe the gasket line clean. Homes within a mile of the Indian River Lagoon should rinse frames more often because salt film accelerates corrosion on any metal. The powder-coated finishes on the VLX 80 are engineered for coastal environments, but regular rinsing keeps the finish looking new longer. Avoid abrasive cleaners and pressure washers on the glass seal area.
Get a Quote - VLX 80 Awning Window in Fort Pierce
Replacing windows is a five-figure decision in most cases. You should know exactly what the VLX 80 costs before you say yes to anything. We provide free on-site measurements and written, line-item pricing so you can compare without pressure. Call (772) 218-5890 to schedule your free estimate in Fort Pierce, and let’s get your project started right.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Fort Pierce, FL and the Treasure Coast.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
