Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
VLX 500 Sliding Window in Fort Pierce, FL | TruePane Windows & Doors
The VLX 500 Sliding Window brings a thin-profile aluminum frame and a glide so smooth it feels almost weightless. Built by installed by TruePane Windows & Doors, this is the window homeowners across Fort Pierce choose when they want wide glass, clean sightlines, and hardware that won’t fight them ten years from now. We’re an authorized installation partner, which means you get factory-backed coverage plus a local crew that knows how to set these units in coastal Florida homes the right way. Call (772) 218-5890 to talk specs, lead times, or to schedule a free measurement.
Product Overview - VLX 500 Sliding Window
The VLX 500 is a high-performance aluminum sliding system designed around two ideas: keep the frame as slim as possible, and make the sashes move without effort. The profile measures just 1.97 inches across the sight line, which is noticeably thinner than most standard residential aluminum. That gives you more glass and less metal, so a living room facing the St. Lucie River or a bedroom overlooking a backyard garden in Fort Pierce gets the light and view it deserves.
It comes in two track layouts. The 2-track configuration is the workhorse for standard openings, a straightforward two-sash setup where one side slides behind the other. The 3-track configuration gives you three sashes across the opening, which means you can open a wider area to the breeze, something Fort Pierce homeowners appreciate on evenings when the ocean air finally cools down.
The frame walls run 0.079 inches thick. That number matters because it’s the difference between a window that stays square and true season after season, and one that starts to sag or bind. Add thermal-break construction and a roller system engineered for repeated daily use, and you have a window that performs as well in year ten as it did on install day.
Buyers choose the VLX 500 for a few common reasons. Some are replacing tired single-pane sliders from the 80s and 90s. Others are building new and want a modern profile that matches clean-lined architecture. And many are upgrading ahead of hurricane season, because the laminated impact glass option turns this window from a design choice into a protective barrier.
Technical Specifications
Here’s what the VLX 500 brings to the table, in plain terms. These are the numbers our customers ask about most before scheduling an installation in Fort Pierce.
- Profile width: 1.97 inches across the sight line
- Frame wall thickness: 0.079 inches
- Track configurations: 2-Track (two sashes) or 3-Track (three sashes)
- Glass types: Clear, Frosted, Low-E, Tempered, Laminated
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
- Screen choices: Retractable screen or sliding screen
- Energy rating: NFRC-certified thermal performance via thermal break
- Installation standard: AAMA 2400/2410 compliant, AAMA 812 perimeter sealant
- Wind load: Rated for Fort Pierce coastal wind requirements, impact-rated laminated option available
Performance Features
Thermal Efficiency - The VLX 500 carries a built-in thermal break that separates the interior and exterior aluminum. That stops heat from riding the metal frame into your home. With Low-E glass added, this window helps keep a Fort Pierce AC bill in check through July and August, when the sun doesn’t let up. NFRC-rated performance means you can compare actual numbers, not marketing talk.
Acoustic Performance - If you live near US-1, the railroad tracks, or a neighborhood where lawn equipment starts early, you’ll notice the difference. The tight frame tolerances plus laminated glass (when selected) cut down on outside noise. We’ve had customers tell us their front bedroom finally became usable after swapping out old sliders for the VLX 500.
Airtightness & Weather Seal - Air leaks are what make a room feel drafty and force your HVAC to work harder. The VLX 500 is engineered to keep air movement across the frame at a minimum, and our install crew seals every perimeter joint with AAMA 812 low-expansion foam. That’s a spec detail, but in practice it means no whistling wind on a breezy March afternoon in Fort Pierce.
Waterproofing - Coastal Florida gets more than fifty inches of rain a year, and a window that can’t shed water is a slow-rot problem waiting to happen. The VLX 500’s drainage design moves water out and away from the frame. Our installation adds a layer of protection: proper sill flashing, a full perimeter seal, and a final water test before we call the job done.
Wind Resistance - Fort Pierce sits squarely in a high-wind zone, and building codes reflect that. The VLX 500 is wind-load rated for our local climate, and when you choose the laminated impact glass option, you’re getting a window built to hold together under debris impact. That matters for both safety and insurance documentation.
Security & Hardware - The lock mechanism on the VLX 500 engages solidly, not with that flimsy half-latch feel you find on budget sliders. Combined with the beefier frame wall at 0.079 inches, you get a window that resists forced entry better than most stock aluminum units sold in Florida.
Color & Glass Options
Six finishes cover nearly every design direction we see in Fort Pierce homes.
Premium Black is the choice for modern and contemporary exteriors, especially paired with white or light stucco. It creates a strong contrast that reads deliberate and sharp. Pure White works with traditional Florida architecture, coastal cottages, and any home where the window should blend into trim rather than stand out. Anodized Silver gives you that honest, exposed-aluminum look, a favorite for mid-century and industrial-inspired builds. Bronze adds warmth without going dark, and works beautifully on homes with earthy exterior palettes. Champagne is the subtle middle ground between silver and bronze, popular in higher-end communities along Indian River Drive. Teak Wood delivers the warmth of wood grain without any of the rot, warping, or termite vulnerability that real wood frames bring to a Florida climate.
On the glass side, Clear is your baseline. Frosted works for bathrooms and anywhere privacy matters more than the view. Low-E is the energy play, cutting solar heat gain while keeping natural light. Tempered adds shatter resistance. Laminated is the impact-rated option that meets Fort Pierce wind-borne debris codes and provides the best acoustic and security performance. Most of our customers combine Low-E with either tempered or laminated depending on code requirements and window location.
Installation by TruePane Windows & Doors in Fort Pierce
Here’s the thing about windows: a great product installed poorly is a bad window. We see it all over Fort Pierce, sliders from quality brands leaking at the corners or binding because the frame got racked during install. That’s why we treat installation as its own craft.
Our process starts with a pre-install inspection. We measure the opening at multiple points, check the framing for rot or water damage, and verify the rough opening is sized correctly for the VLX 500 unit. Skipping this step is how you end up with a window that doesn’t sit right.
On install day, we set every unit level, plumb, and square. That means checking with a laser level and shimming precisely, not eyeballing it. A window that’s off by even a quarter inch will bind on the rollers and wear out prematurely. We take the time.
For sealing, we follow AAMA 2400 and 2410 installation standards, using AAMA 812 low-expansion foam sealant on all perimeter joints. In Fort Pierce, where afternoon thunderstorms arrive like clockwork from June through September, that perimeter seal is your first line of defense against water intrusion. We flash the sill properly, seal the interior and exterior, and run a final water test to confirm everything sheds water the way it should.
One more consideration: improper installation voids the manufacturer warranty. No manufacturer will cover a window that failed because it was set out of square or sealed incorrectly. When TruePane Windows & Doors installs your VLX 500, the ViewLux warranty stays intact, and our workmanship is backed too.
Fort Pierce codes require impact-rated products for certain applications, and the specific requirements depend on your wind zone and where the window sits on the structure. We’ll help you sort out whether laminated glass is mandatory for your project or just a smart upgrade.
Frequently Asked Questions - VLX 500 Sliding Window
Lead time typically runs 3 to 6 weeks from order to delivery, depending on the glass package, finish, and track configuration you select. Custom sizes and laminated impact glass can push toward the longer end of that range. Call (772) 218-5890 and we’ll give you a current estimate for your specific configuration.
Yes, when configured with Low-E glass that meets ENERGY STAR requirements, the VLX 500 can qualify for the federal energy-efficient windows credit. Your eligibility depends on the glass you choose and your total installation costs for the year. We’ll provide the documentation you need at the time of your quote.
The VLX 500 carries a manufacturer warranty from and because TruePane Windows & Doors is an authorized installation partner, your coverage stays valid. Our workmanship is backed as well. Exact warranty terms depend on the glass package and finish, so ask us for the full details when we build your quote.
Yes. The VLX 500 is fabricated to order, not pulled off a shelf. We measure your exact opening in Fort Pierce and order the unit to fit, so whether you’re replacing an odd-size slider from the 1970s or framing a new opening, the window matches your dimensions. Call (772) 218-5890 to schedule a free measurement.
Aluminum frames need very little upkeep, especially compared to wood. Wipe the tracks out a few times a year so sand and leaves don’t build up, spray the rollers lightly with a silicone lubricant annually, and wash the frame with mild soap and water. Salt air near the coast can dull finishes over time, but the factory-applied coatings on the VLX 500 are designed to resist that.
Get a Quote - VLX 500 Sliding Window in Fort Pierce
If you’re researching the VLX 500 for a Fort Pierce home, chances are you want real numbers, not a generic price range. The best way to get that is a free on-site measurement. We’ll come out, confirm your opening sizes, talk through glass and finish options, and build you a written quote you can actually plan around. Call (772) 218-5890 to start.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Fort Pierce, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images



Before
After
Before
After
Before
After