Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterVLX 100 Pivot Door in Fort Pierce, FL | TruePane Windows & Doors
The VLX 100 Pivot Door is a heavy-duty aluminum entry system that rotates on a vertical center axis instead of traditional side hinges, letting homeowners in Fort Pierce install a single glass panel up to 60 inches wide and 120 inches tall. It’s an architectural focal point, not just a front door. As an authorized ViewLux installation partner, TruePane Windows & Doors handles the entire process from measurement to final seal, so you get a door that performs exactly as engineered. Call (772) 218-5890 to discuss your project or schedule a free on-site measurement.
Product Overview - VLX 100 Pivot Door
The VLX 100 is built around one idea: a door should be an architectural statement, not an afterthought. Unlike a conventional hinged door that swings from one side, a pivot door rotates on a vertical axis set in from the jamb. That changes the entire feel of an entryway. The door glides open with far less effort than its size suggests, and the oversized glass panel turns a doorway into a wall of light.
This is not a hollow-core slab with a pivot mechanism bolted on. The VLX 100 uses extruded aluminum profiles with a 0.098-inch wall thickness, which is among the thickest you’ll find in residential pivot systems. The frame profile measures 2.56 inches in width, giving the door real visual mass while keeping sightlines clean. That thickness matters in Fort Pierce, where salt air and humidity punish underbuilt hardware. Aluminum doesn’t rust, doesn’t warp, and doesn’t swell the way wood or vinyl does after a few Florida summers.
Buyers choose this series for modern coastal homes, mid-century remodels, and any project where the entry needs to feel significant. We’ve installed the VLX 100 on waterfront properties in Fort Pierce where the door faces the Atlantic breeze daily, and the finish still looks new because the powder coating is applied to a marine-grade substrate. It’s a door you buy once.
TruePane Windows & Doors is an authorized ViewLux installation partner. That means we order directly from install to factory specifications, and keep your warranty intact. If you’re ready to price this door, call (772) 218-5890.
Technical Specifications
Here are the numbers that define the VLX 100. We’ve translated the factory specs into plain language, but every measurement below is what you’ll see on your order confirmation from ViewLux.
| Specification | VLX 100 Value |
|---|---|
| Frame wall thickness | 0.098 inch extruded aluminum |
| Profile width | 2.56 inches |
| Maximum panel size | 60 inches wide × 120 inches tall (single panel) |
| Glass options | Clear, Frosted, Obscure, Low-E, Tempered, Laminated |
| Finish options | Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood |
| Thermal performance | Thermal break technology, NFRC-rated |
| Installation standard | AAMA 2400/2410 compliant |
| Perimeter seal | AAMA 812 low-expansion foam at all joints |
| Wind load | Rated for Fort Pierce climate requirements |
If your opening is smaller or larger than these maximums, talk to us. Custom configurations are available through and TruePane Windows & Doors will verify your rough opening before anything is ordered.
Performance Features
Thermal Efficiency. The VLX 100 frame includes a thermal break that separates the interior and exterior aluminum faces. That interruption stops heat from conducting through the metal, which keeps your air conditioning inside during a Fort Pierce August. NFRC-rated performance means the numbers are independently verified, not marketing claims.
Acoustic Performance. The thick 0.098-inch frame naturally dampens sound transmission better than thin residential profiles. When paired with laminated glass, the VLX 100 cuts down road noise, boat traffic, and neighborhood sounds noticeably. If you live near Seaway Drive or anywhere with steady traffic, ask us about the laminated glass upgrade.
Airtightness & Weather Seal. Every perimeter joint gets AAMA 812 low-expansion foam during installation. This isn’t a bead of caulk smeared around the rough opening. The foam expands into gaps and cures to a complete air seal, which stops drafts, insects, and humidity from sneaking past the frame.
Waterproofing. Fort Pierce gets roughly 55 inches of rain per year, much of it in short, intense afternoon storms. The VLX 100 is designed with integrated drainage channels in the sill and a continuous weather gasket system, so water that hits the door gets routed away from the threshold instead of pooling against it.
Wind Resistance. The VLX 100 is wind-load rated for coastal Florida building codes. If you want impact-rated protection, choose the laminated glass option, which holds together on impact even if a branch or storm debris strikes the panel. We can help you determine whether your specific Fort Pierce property requires impact ratings based on your wind zone.
Security & Hardware. The pivot mechanism itself is a security feature. A pivot door distributes weight across a top and bottom hinge point, which makes forced entry significantly harder than prying a standard side-hinged door. Pair the VLX 100 with a multi-point lock system from and the door becomes a genuine barrier, not just a visual one.
Color & Glass Options
The VLX 100 comes in six finishes. Premium Black and Pure White are the most requested in Fort Pierce, especially for modern and contemporary builds where the door needs to frame the view rather than compete with it. Anodized Silver reads as industrial and pairs well with concrete or exposed steel. Bronze and Champagne lean warmer, which suits Spanish Colonial and Mediterranean-style homes common along Indian River Drive. Teak Wood is a powder-coated woodgrain finish that gives you the look of timber without the rot, termite, and maintenance issues that real wood faces in Florida humidity.
Glass is where the door becomes yours. Clear glass maximizes light and is the default for owners who want the least visual barrier between inside and out. Frosted and Obscure options preserve light while adding privacy, which matters for waterfront lots where neighbors or boat traffic get a direct sightline to your entry. Tempered glass is standard for safety. Laminated glass adds impact resistance and sound dampening, and it’s the right choice if your Fort Pierce home sits in a high-wind zone. Low-E glass adds a microscopically thin coating that reflects heat, which makes a surprising difference on a west-facing entry that bakes in the afternoon sun.
Call (772) 218-5890 if you want to see finish and glass samples in person before committing.
Installation by TruePane Windows & Doors in Fort Pierce
A pivot door is only as good as the team that hangs it. The VLX 100 weighs significantly more than a standard entry door because of the 0.098-inch aluminum thickness and oversized glass panel. That weight means the rough opening, the floor, and the header all have to be prepped correctly before the door ever arrives on site.
Our installation process starts with a pre-install inspection. We measure the rough opening in three places for width and height, check the floor for level, and verify the header can carry the load. Then we set the pivot points, shim the frame to perfectly plumb and square, and anchor everything to code. Every perimeter joint gets AAMA 812 low-expansion foam, which seals the gap fully without distorting the frame.
We install to AAMA 2400/2410 standards, the recognized national benchmark for window and door installation. After the door is hung, we run a water test on the threshold and perimeter, then walk you through operation and maintenance before we clean up and haul away the old door.
Here’s what matters most: ViewLux warranties cover manufacturing defects, not installation errors. If a door is installed out of square, the pivot binds. If the perimeter seal is incomplete, water gets in. We see failed DIY pivot installations in Fort Pierce a few times a year, where a homeowner saved money on labor and ended up with a $4,000 door that binds on day one. The warranty is void, and the fix costs more than the original install would have. Our advice is simple: let a trained crew install this door. Call (772) 218-5890 to schedule a free on-site measurement.
Frequently Asked Questions - VLX 100 Pivot Door
ViewLux typically ships the VLX 100 within 4 to 6 weeks from order confirmation, depending on your glass and finish selections. Custom sizes or laminated glass can add a week or two. TruePane Windows & Doors confirms the exact timeline when we place your order, and we’ll schedule your installation date based on that confirmed ship date rather than an estimate. Call (772) 218-5890 to get a current lead time for your specific configuration.
The VLX 100 with Low-E glass may qualify for federal energy efficiency tax credits because doors with NFRC-rated thermal performance are eligible under certain conditions. Whether your specific door qualifies depends on the glass package, the U-factor rating, and the current IRS guidance at the time of purchase. We recommend confirming details with a tax professional, and we’ll provide the NFRC documentation for your door so you have everything needed. Call (772) 218-5890 with questions.
ViewLux provides a manufacturer warranty on the VLX 100 frame, glass, and powder coat finish, with the exact terms depending on your configuration. The key detail: the warranty covers manufacturing defects only when the door is installed by an authorized partner like TruePane Windows & Doors using AAMA 2400/2410 installation standards. Improper installation voids coverage. We’ll walk you through the warranty document line by line before you sign anything.
Yes, within structural limits. The VLX 100 is rated for a single panel up to 60 inches wide by 120 inches tall. If your opening is smaller, ViewLux can produce a custom size, and TruePane Windows & Doors will field-verify every measurement before ordering. The pivot point placement and hardware are also configurable, so the door can be offset if you prefer an asymmetrical entry. Call (772) 218-5890 and we’ll measure your opening for free.
Aluminum frames need very little maintenance in Fort Pierce, which is one of the reasons homeowners here choose the VLX 100 over wood. Wash the frame quarterly with mild soap and water to remove salt residue, especially if you live near the water. Check the perimeter seal annually for any gaps. Lubricate the pivot hardware once a year with a silicone-based lubricant. That’s the entire routine, and it takes under an hour total per year. Call (772) 218-5890 if you ever notice binding or seal wear and we’ll come evaluate it.
Get a Quote - VLX 100 Pivot Door in Fort Pierce
If you’re considering the VLX 100 Pivot Door for your Fort Pierce home, the next step is a free on-site measurement. We’ll confirm your opening dimensions, discuss glass and finish options, and give you a written line-item estimate with no hidden costs. Call (772) 218-5890 to schedule your measurement or start the conversation today.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Fort Pierce and the Treasure Coast.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
