Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom & Geometric Windows for Fort Pierce Homeowners
Custom and geometric windows in Fort Pierce run $900 to $4,800 installed for most residential openings, depending on the shape, glass package, and framing requirements. A standard replacement goes in one day. A fully custom radius or radius-transom combination usually takes two to four weeks from template to install, and that’s the timeline we quote, in writing, before we cut anything.
Dale Kessler started TruePane Windows & Doors in 2008 on a rule that’s still written on the shop whiteboard: if the pane is not true, the job is not done. Since then, we’ve templated, ordered, and set custom and geometric windows across St. Lucie County, from historic Fort Pierce bungalows to new construction in Port St. Lucie. We measure every opening twice, register both warranty layers before the truck leaves the driveway, and back every install with the Done Right Promise. Call (772) 218-5890 and a live person answers, 24 hours a day, 7 days a week.
What Our Custom & Geometric Windows Service Includes
Custom Impact Windows
Fort Pierce sits in a high-velocity hurricane zone, and any custom window we set here is available as a full impact-rated unit with laminated glass and reinforced framing. When you replace an odd-sized or unusually shaped opening with an impact window, the opening gets templated to the exact rough opening dimensions, not the nearest stock size. That means the mullion lines stay true and the glass clears the frame by the manufacturer’s specified tolerance, which keeps the warranty valid. We install impact units from PGT and CGI regularly, and we register both warranty layers in writing before we leave the driveway.
Geometric & Shaped Windows
Geometric windows cover the family of non-rectangular shapes: trapezoids, pentagons, octagons, triangles, and clipped-corner units that fill gable ends, stairwells, and decorative wall sections. They’re common in Fort Pierce homes built in the 1980s and 1990s, when builders used shaped windows to break up tall walls. The trick is that off-the-shelf windows never fit these openings correctly, and a bad fit shows up as a fogged seal or a binding sash within two seasons. We template the actual opening, order the unit to the actual angles, and set it so the glass sits evenly in the frame.
Arched & Curved Windows
Arched and curved windows are the ones where the rough opening has a radius at the top and the sash has to follow that curve exactly. These are the windows that most often get installed wrong, because a quarter-inch error at the spring line turns into a visible gap at the crown. TruePane orders arched units from manufacturer-approved templates with the radius matched to the actual opening, not the builder’s original drawing. We’ve had Fort Pierce homeowners bring us arched windows that were “close enough” from a previous install and leaked during summer storms. We won’t set one that way. The glass has to seat true to the frame, or we don’t install it.
Oversized Openings
Oversized openings are any window that exceeds stock size limits, roughly anything over 40 square feet of glass or with a single dimension over 8 feet. These jobs need engineering review because the dead load of the glass, the wind load from coastal storms, and the thermal expansion all stress the frame differently than a standard bedroom window. When we quote an oversized custom window in a Fort Pierce home, we spec the frame reinforcement, the glazing package, and the anchoring schedule on paper. You see exactly what you’re buying. Then our team installs it with a two-person crew minimum, which is what the glass weight requires.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom & Geometric Windows
We’re an authorized installer for more than a dozen manufacturer lines, and that matters most on custom work. Every manufacturer has its own template system, its own glass-makeup options, and its own warranty registration process. Getting any one of those wrong voids the coverage you paid for. We’ve handled hundreds of PGT custom impact units in St. Lucie County, and we know their impact-rated laminated glass offerings well enough to quote side by side against other manufacturers on paper, in plain English.
We also work with Mr-Glass units regularly. ViewLux makes shaped and geometric windows with narrow sightlines that Fort Pierce homeowners often choose for mid-century and coastal-modern elevations. Mr-Glass specializes in retrofit geometric windows where the interior trim stays in place. Whether you’ve got a PGT trapezoid, a ViewLux arch, or any other make sitting in the opening, we can measure, quote, and install it.
Signs You Need Custom & Geometric Windows Right Now
- You see moisture or fog inside the glass. A failed seal on a custom window means the insulating gas has leaked out and the unit is losing thermal performance. On shaped glass, the failure often starts at the corner joints where the seal has the most stress. Once the seal goes on a custom unit, the only fix is replacement glass or a new window, and the longer it sits, the more likely the frame takes on water damage.
- The window binds, sticks, or won’t close completely. Custom and geometric windows bind when the frame has settled out of square or the original install was out of true from day one. You’ll notice it in July, when the heat makes the vinyl expand and the sash scrapes the frame. A window that won’t close lets conditioned air out and humidity in, which is the start of mold problems in a Florida home.
- You see daylight around the operable sash or the frame. Gaps around a custom window’s sash mean the weatherstripping or the frame alignment has failed. The damage compounds fast in hurricane season, because wind-driven rain finds every opening. For a shaped or arched window, the gap is most obvious at the radius or at the corners.
- The glass is cracked, chipped, or starred. Impact damage on a shaped or oversized pane doesn’t just look bad. It compromises the structural integrity of the glass and, on impact-rated units, voids the protection the window is designed to provide. A hairline crack in annealed glass can run across the whole pane with the next thermal cycle. Don’t wait on this one.
- The last contractor told you the opening “can’t be done” or quoted a number that didn’t include glass, frame, and labor. A lot of companies in the Fort Pierce area won’t touch true custom work because it requires templating, specialist ordering, and more time on the wall. When a bid only covers the unit and not the install, or the installer won’t put the window type on paper, you’re being set up for a surprise. TruePane quotes the whole job, fixed, with no change orders.
Our Custom & Geometric Windows Process - Step by Step
- 1
Measure and template. Our background-checked, uniformed technician comes to your Fort Pierce home and measures every opening twice, recording dimensions, squareness, and rough-opening condition. For radius work, we template the actual curve with a physical pattern, not a tape-measure chord guess. This is the step that determines whether the window fits true.
- 2
Quote on paper, side by side. We price the window by manufacturer line, glass package, and frame option, alongside each other so you see what the differences cost. We include installation labor, anchoring, flashing, and trim. The number you see is the number you pay. No surprise line items on the bill.
- 3
Order and register warranties. Once you sign off, we order directly from the manufacturer and register both warranty layers in writing before the window arrives at your home. You receive the durations stated on paper, not a verbal reassurance. If the manufacturer’s warranty has any exclusions that apply to your install, we tell you about them before you pay.
- 4
Install and seal. Our crew sets the window to the manufacturer’s specified tolerances, levels it, anchors it to code, and seals it with the appropriate flashing and sealant for coastal Florida conditions. For oversized or heavy glass units, a two-person crew handles the set so the glass never gets torqued. Quality control checks the sash operation and the seal before we clean up.
- 5
Walk you through the job and the paperwork. Before we leave, we show you the installed window, explain the operation and care, and hand you the warranty documentation. If anything isn’t done right, you call us and we make it right under the Done Right Promise. No arguing, no fine print that covers neither.
How Much Does Custom & Geometric Windows Cost in Fort Pierce?
Most custom and geometric window replacements in Fort Pierce land between $900 and $4,800 per opening. A simple vinyl trapezoid with standard glass typically runs $900 to $1,800 installed. An arched window with a radius-matched sash runs $1,500 to $3,200. Impact-rated custom units, especially oversized openings or laminated glass in PGT or CGI lines, run $2,800 to $4,800 per opening, and an oversized impact window with a custom radius can push past $6,000 depending on the glass make-up and the anchoring requirements. These are real numbers based on jobs we’ve quoted in St. Lucie County, not national averages.
What moves the price: the number of corners on the unit, whether the glass is impact-rated, the glass square footage, and the condition of the rough opening. A rotted buck or out-of-square jamb adds framing repair time. The best way to avoid overpaying is to get a fixed quote that itemizes the window, the labor, the flashing, and the warranty registration. That’s exactly what our free estimate includes. Call (772) 218-5890 and we’ll come measure and quote it in writing.
Custom & Geometric Windows Near Fort Pierce - Our Service Area
TruePane Windows & Doors serves Fort Pierce and the surrounding St. Lucie County and Treasure Coast communities. We handle custom and geometric window projects in Fort Pierce South, White City, Port St. Lucie, Jensen Beach, Vero Beach, Stuart, and Palm City. Our technicians are local, which means you see us at the county fair, not just on a work order. Most custom window estimates in the Fort Pierce area happen within a few days of your call. We’ll be there when we say.
Serving Fort Pierce, FL - Our Local Coverage Area
We’re based in the Fort Pierce area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom & Geometric Windows in Fort Pierce
A custom and geometric window is any window that isn’t a standard rectangular stock unit. That includes trapezoids, octagons, pentagons, clipped corners, and units with arched or radius tops. In Fort Pierce, these windows show up most often in gable ends, stairwells, and high wall sections. TruePane templates each opening and orders the glass to match the actual shape of your wall, not the closest stock approximation.
Most single custom window installations are completed in one visit once the unit has been manufactured and delivered. The full timeline from template to install usually runs two to four weeks for a custom radius or shaped unit, because the manufacturer cuts the glass and builds the frame to your opening’s actual measurements. We quote the timeline in writing at the estimate, and we don’t leave second appointments hanging. Call (772) 218-5890 for a schedule that’s specific to your opening.
Custom geometric windows in Fort Pierce typically run $900 to $4,800 per opening installed. A basic vinyl trapezoid starts around $900, an arched window runs $1,500 to $3,200, and an impact-rated oversized unit starts around $2,800. The exact number depends on the number of corners, whether the glass is impact-rated, and the size of the opening. Our free estimate itemizes the window, the labor, and the warranty registration so you know the fixed price before any work starts.
Yes. We service and install PGT, Mr-Glass custom and geometric windows, and we’re an authorized installer for more than a dozen manufacturer lines in total. We know each manufacturer’s template system and warranty registration process, which means your coverage stays valid. Whether you have one of those brands or any other make, we can measure, quote, and install the replacement correctly.
If a custom or geometric window is broken, cracked, or left open and unsecurable after a storm, that’s a situation where your home is exposed to weather and intrusion. A live person answers the phone at (772) 218-5890 24 hours a day, 7 days a week. We’ll help you secure the opening and get the replacement templated and ordered. For standard planning and replacement, we quote the timeline in writing and show up when we say.
Every custom and geometric window job from TruePane is covered by the Done Right Promise and The Keystone Standard. Both manufacturer warranty layers are registered in writing with durations stated before the truck leaves the driveway. If something isn’t done right, we make it right. No paperwork fights, no arguing, no fine print that covers neither.
Clear the area around the window inside and out so our two-person crew has working room at the opening. Move furniture, plants, and wall hangings at least six feet back from the window. If your home has an alarm system with window sensors, let the technician know before we start so the sensor can be removed and reattached. We handle floor protection and cleanup, but a clear path to the opening keeps the job moving without delay.
Schedule Your Custom & Geometric Windows Service in Fort Pierce Today
When you’re done with out-of-true installs and voided warranties, call the company that puts it all in writing. TruePane Windows & Doors has served Fort Pierce and the Treasure Coast since 2008, and Dale Kessler is still the one who answers for the work. Call (772) 218-5890 today for your free, no-obligation estimate. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Pierce since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.