Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Custom Windows & Doors in Fort Pierce: What to Know First
As an independent ES Windows service provider, we install, replace, and service ES Windows custom windows and doors throughout Fort Pierce and the surrounding Treasure Coast. Most custom ES Windows jobs, whether it’s a new architectural grille package or a full custom-shaped window replacement, are quoted within two business days and installed within two to three weeks of order placement, depending on glass lead times from the manufacturer. We charge a square deal, not a showroom markup: line-item pricing on paper, in writing, before any work begins. If you own ES Windows products and something is not right, call (772) 218-5890 and a live person will answer.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid product, but every window line has its weak points. In Fort Pierce, salt air and summer humidity find them faster than most places. Here is what we see on ES Windows custom windows and doors and how we address it:
- Roller wear on oversized sliding door panels. ES Windows ES-700 and ES-770 series sliding doors carry heavy tempered glass panels. When rollers wear flat after years of use, the panel drops and starts dragging on the track, chewing up the stainless track cap underneath. We replace the rollers, not just lube them, then re-square the panel so the lock stile meets the jamb evenly.
- Seal failure on large fixed picture windows. The ES-400 fixed window line uses dual-pane insulated glass. In Fort Pierce, the south-facing elevations bake all summer, and thermal cycling eventually causes the spacer to lose its seal. The tell is fog between the panes that never clears. We measure the exact daylight opening, order new insulated glass units with the same low-E coating spec, and swap them without pulling the frame.
- Frame oxidation on aluminum storefront and curtain wall systems. ES commercial storefront and curtain wall framing is aluminum; salt spray from the Atlantic works into any unsealed seam. We see white chalky oxidation along the mullions. We clean, treat, and reseal the affected members, and where the frame has corroded through, we replace the stick before it compromises the glazing pocket.
- Architectural grille rattling inside the glass cavity. ES Windows with Simulated Divided Lites (SDLs) or internal grilles occasionally develop a rattle at the grille clip points. It’s not the glass, it’s the plastic grille connectors vibrating inside the sealed cavity. We refit the grille with proper spacer adhesives and verify the unit holds pressure before we walk away.
- Water intrusion at the head of transom-topped custom units. Custom combination windows, transom over fixed pane, are only as good as the flashing detail at the head. We often find insufficient drip edge on Fort Pierce homes where the original installer skipped the head flashing. We pull the exterior casing, install proper head flashing with a positive slope, and reset the unit so water sheds away from the opening.
Our ES Windows Custom Windows & Doors Process
Every ES Windows job we take follows the same sequence, whether it’s a single window or a whole elevation:
- 1
Call and diagnosis. You call (772) 218-5890. A live person answers. We schedule a visit, and a background-checked, uniformed technician walks the openings with you.
- 2
Measure twice. Every opening gets measured for width, height, square, and depth. If the pane is not true, the job is not done, and that starts with the tape.
- 3
Parts decision on paper. We lay out OEM and quality aftermarket options side by side, with pricing, lead times, and warranty implications. You decide with the facts in front of you.
- 4
Removal and preparation. We pull the old unit without damaging surrounding stucco, drywall, or trim, then prep the opening for proper flashing and shimming.
- 5
Set, true, and seal. The new unit goes in level, plumb, and square. We shim at the manufacturer-specified points, screw through the frame flanges, and run flashing tape at the sill and jambs before the exterior casing goes back on.
- 6
Test and walkthrough. We operate every sash and door panel in front of you, verify seal contact, and run a water check on exterior seams. Before the truck leaves, we register both manufacturer warranty layers in writing and hand you a copy.
What ES Windows Custom Windows & Doors Costs in Fort Pierce
Straight numbers, because that’s how we do business. Here are the ranges we typically see on ES Windows work in Fort Pierce:
- Replacement insulated glass unit for a fogged ES-400 fixed window: $280-$550 installed, depending on size and low-E spec.
- Sliding door roller replacement for an ES-770 panel: $180-$340, including panel re-alignment and track cap replacement if needed.
- Full custom-shaped window replacement, arched or radius top: $1,400-$3,200 per opening, including flashing and trim.
- Architectural grille repair inside a sealed unit: $220-$400 per unit.
- Storefront or curtain wall reseal per mullion joint: $120-$260 per vertical joint, including surface prep and sealant.
What moves the price is glass type, frame finish, whether we’re replacing the frame or just the glass, and access (second story, tight eave overhangs, or hurricane-rated reuse requirements). Every estimate is free and written in line items. Call (772) 218-5890 and we’ll get you exact numbers.
Why Fort Pierce Homeowners Call TruePane Windows & Doors for ES Windows Work
A homeowner in Fort Pierce with ES Windows already paid good money once. What they don’t need is a contractor who guesses. Dale Kessler grew up off Okeechobee Road and learned the trade at Indian River State College before working glass with his father along the Treasure Coast. We’ve been at this long enough to know where ES Windows products hold and where they let go in this climate. Every job carries our Done Right Promise: if it’s not done right, we make it right, no paperwork fights. We’re also authorized installers for, and PGT, which means if an ES Windows unit is better replaced than repaired, we can quote you a comparable line side by side and you can make an honest choice. A live person answers our phone 24/7. We’ll be there when we say. And we stand behind it.
FAQs
Yes, we source ES Windows replacement rollers, weatherstripping, lock mechanisms, and insulated glass units through established glazing supply channels, and we’ll always show you the OEM option alongside a quality aftermarket alternative on paper with pricing before you commit. Call (772) 218-5890 and we’ll check current availability for your specific unit.
Glass replacement and component-level repairs done by a qualified independent contractor typically will not void the manufacturer frame warranty, but the new glass unit itself carries its own warranty from the glass supplier. We register both warranty layers in writing before the truck leaves, so you know exactly what’s covered and for how long.
For fogged glass, failed rollers, or grille rattles, repair makes sense and costs a fraction of replacement. If the frame is oxidized through, the sash is racked, or the unit is twenty-plus years old with multiple failures, replacement is the honest answer. We’ll quote both paths and let you decide.
We schedule diagnostics within a few business days in Fort Pierce, and most component repairs are completed in a single visit once parts are in hand. Custom glass orders depend on the manufacturer’s lead time, typically two to three weeks. Call (772) 218-5890 to get on the schedule.
Yes, we template custom shapes in the field with a direct physical pattern of the opening, order the bent or radius glass to that exact template, and set the unit so it seats true the first time. If it is not right when the caulk dries, it will not be right in two years either.
Contact TruePane Windows & Doors for ES Windows Work in Fort Pierce
If your ES Windows are fogged, binding, rattling, or leaking, call (772) 218-5890. A live person answers, we’ll schedule a diagnostic visit, and you’ll get a free written estimate with line-item pricing before anything gets ordered. Serving Fort Pierce, Port St. Lucie, Vero Beach, and the Treasure Coast since 2008 through the craft Dale Kessler started when he put his name on the truck. We’ll be there when we say. We stand behind it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Pierce and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.