Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Window Replacement: The Fort Pierce Owner’s Guide
We stock and install Therma-Tru-compatible window replacement components throughout Fort Pierce, with most jobs completed in a single visit. Installed pricing typically runs $185 to $420 per window depending on the sash, balance, or hardware that failed, and our trucks carry the common Therma-Tru parts so you’re not waiting on a freight shipment. Most Fort Pierce homeowners discover the problem when a sash won’t stay up, a lock no longer catches, or condensation starts fogging between the panes where it never did before.
Therma-Tru built its name on entry doors, but their window lines ride on the same hardware and sealing philosophy. When a component fails, it tends to fail in a way that’s obvious: the window binds, drops, or leaks. The fix is usually one part, not an entire window. Knowing which part is the difference between a half-hour repair and a quote for work you don’t need.
Which Therma-Tru Models This Applies To
Therma-Tru’s window offerings include the Classic-Craft, SlimLine, and Tru-Defense series, each with slightly different sash dimensions and balance hardware. The compatibility gotcha we see in Fort Pierce: a balance from a Classic-Craft double-hung will not fit a SlimLine of the same rough opening, because the shoe and tube diameter differ by 3/16 inch. We measure the existing part on site, not the rough opening, before we quote anything.
On the OEM versus aftermarket question: genuine Therma-Tru components are the safe call when the window is under warranty, because installing a non-OEM part can void what’s left of that coverage. Once warranty is done, which on most Therma-Tru windows runs 10 years on the frame and 20 on the glass, quality aftermarket balances and weatherstripping from the manufacturers we trust perform as well and cost 20 to 30 percent less. We’ll show you both options on paper, side by side, with the part numbers written out, so you’re not buying blind.
Signs Your Therma-Tru Window Replacement Is Failing
- Sash drops or slams shut when released. The spring balance has lost tension or the constant-force coil has snapped. In Fort Pierce’s salt air, the coil spring is usually the first casualty, corroding where it anchors to the frame.
- Fog or moisture between the panes. The insulated glass unit’s seal has failed. Therma-Tru’s argon-filled units do not tolerate Florida’s humidity swings forever – once the seal breaches, the glass draws moisture and you’re looking at an IGU replacement, not a repair.
- Lock or keeper no longer aligns. The sash has shifted, usually from a worn pivot bar or a balance that’s no longer holding square. Forcing the lock eventually strips the keeper screws right out of the vinyl.
- Drafts you can feel with the window closed. The compression weatherstripping has flattened or torn. Therma-Tru’s bulb seals harden under UV exposure – which Fort Pierce gets about 3,000 hours of per year – and once hardened, they don’t spring back.
- Window binds or sticks halfway up. The shoe or pivot bar is worn, or the track has accumulated enough sand grit to jam the mechanism. Older Therma-Tru units with aluminum shoes are prone to this after a decade in coastal conditions.
Replacement Cost & What’s Included
In Fort Pierce, expect to pay $185 to $420 installed for a single Therma-Tru window component replacement, with most balances and locks landing in the $220 to $280 range. A failed insulated glass unit runs higher, typically $380 to $520, because the glass is ordered to the exact dimensions and glazed in place.
Our price includes the part, the labor, disposal of the old component, and a written workmanship warranty. We measure twice, quote the manufacturer line options side by side, and register both warranty layers before the truck leaves your driveway. You will not see a change order at the end of the day. If a job uncovers more than we quoted, we stop, show you, and let you decide. A square deal is just how Dale Kessler has run this company since 2008.
DIY or Call Us?
You can safely check the manufacturer label on the sash and note whether your window is Classic-Craft, SlimLine, or Tru-Defense. That information saves a trip and gets your quote moving faster when you call. You can also note whether the failure is on one window or several – when one coil spring corrodes through, its neighbors are usually not far behind.
What we’d caution against is the balance replacement itself. Therma-Tru uses tensioned spiral balances on many units, and releasing that spring wrong sends a sharp metal coil across the room. We’ve repaired the drywall behind a few ambitious DIY attempts in Fort Pierce. It’s a half-hour job for a trained technician with the right winding tool, and if the pane is not true when it’s done, it isn’t done. Call (772) 218-5890 and we’ll be there when we say.
FAQs
Frames typically hold up 20 to 25 years in our coastal climate, but the hardware – balances, locks, and weatherstripping – usually needs replacement once before then, around the 10 to 14 year mark. Salt air accelerates corrosion on metal components. Call (772) 218-5890 and we’ll tell you honestly whether your window needs a part or a full replacement.
Yes, in most cases a failed balance, lock, or weatherseal is a straightforward component swap that brings the window back to proper function, while a fogged IGU is a glass replacement rather than a whole-window job. Replacement is only warranted when the frame itself has warped or rotted. We’ll always show you the repair option first if it’s viable.
Most single-window component replacements take 30 to 60 minutes on site. We stock the common parts on the truck, so we usually finish in one visit without waiting on an order. Call (772) 218-5890 to schedule a time that works.
We keep balances, locks, keepers, pivot bars, and weatherstripping for Therma-Tru Classic-Craft, SlimLine, and Tru-Defense windows on our trucks, along with parts for PGT, CGI, and CWS lines. For less common sizes we order directly with the manufacturer and schedule the install when the part lands, usually within a week.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Pierce and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.