Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterBay & Bow Windows in Fort Pierce, FL | TruePane Windows & Doors
Bay and bow windows change how a room feels. They push outward, catch light from three angles, and create a reading nook or dining alcove where a flat window never could. In Fort Pierce, where coastal winds and flying debris are a design reality, these windows also need to hold up. TruePane Windows & Doors fabricates and installs hurricane-rated bay and bow configurations in laminated impact glass, sized to your opening and your wind zone. We serve Fort Pierce, Hutchinson Island, Lakewood Park, and the surrounding Treasure Coast. Call (772) 218-5890 to talk through a project.
Product Overview - Bay & Bow Windows
Most Fort Pierce homes built before the 2002 Florida Building Code have flat windows that would fail a modern wind-load test. Bay and bow windows are more complex: a center picture window flanked by angled or curved side units, all joined into one projecting assembly. Done wrong, they leak. Done right, they add real square footage inside the room and give you panoramic sightlines no flat window can match.
The difference with our Impact Series is the engineering underneath the good looks. Every panel carries laminated impact glass with a PVB interlayer, the same construction used in storefronts that survive hurricane season without plywood. The frame is custom fabricated to the opening, whether that’s a three-lite bay with 45-degree angles or a four- to five-lite bow with a gentle arc. You choose the geometry; we build to it.
For Fort Pierce homeowners, this solves two problems at once. You get the architectural character of a projecting window, and you get a system engineered to Florida Building Code High-Velocity Hurricane Zone requirements. No shutters, no plywood, no compromise. TruePane Windows & Doors installs these across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so the hardware and lamination options are broad enough to match your existing windows or set a new standard for the whole house.
Technical Specifications
- Frame materials: Aluminum or vinyl, selected for the opening and exposure
- Maximum size: Custom fabricated to the opening; no stock bay or bow sizes
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
- Finish options: White, almond, bronze, black, tan
- Sill options: Standard sill or seat/shelf sill for interior depth
- Design pressure: Matched to your wind zone, up to +/-100, never higher
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration
Because every bay or bow assembly is built to the opening, there’s no “standard size” penalty. We field-measure, fabricate, and install with the same crews that handle our commercial-grade impact work. That matters when the assembly spans eight feet or more and four separate lites have to move as one unit.
Hurricane & Compliance Performance
Laminated Impact Glass
Two panes of glass bonded to a PVB interlayer. On impact, the glass may crack but stays in the frame, holding the building envelope closed. This is the core of an HVHZ-rated system, not a film applied after the fact.
Miami-Dade NOA / FL Product Approval
Every configuration we sell carries a Miami-Dade Notice of Acceptance and a Florida Product Approval number. These are issued per configuration, not blanket, so we verify on your specific quote before you commit.
FBC / HVHZ Compliance
Engineered to Florida Building Code High-Velocity Hurricane Zone requirements. In Fort Pierce and St. Lucie County, that’s the standard that governs permitted work, not a marketing label.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). Bay and bow assemblies are evaluated as a complete unit, including the mullions and corner posts.
Design Pressure for Your Wind Zone
We match design pressure to the wind zone of the specific opening, up to +/-100. Never higher. Over-engineering a window can be as wrong as under-engineering it, and we won’t sell a rating you don’t need.
Energy Performance
Low-E and insulated glass options are available on every bay and bow line. In a projecting window with three-plus lites of glass, the right coating and air space make a measurable difference on afternoon sun in Fort Pierce.
Color & Glass Options
Fort Pierce architecture runs from 1950s concrete-block ranchers to newer Key West and Mediterranean style homes. White aluminum frames suit the coastal cottages and stucco exteriors; bronze and black read more modern against concrete tile; almond and tan blend into masonry tones without calling attention to the frame.
On glass, the decision usually comes down to two priorities. Clear laminated impact glass gives you the truest light and the least visual change from your existing windows. Tinted glass cuts glare on west-facing rooms. Low-E insulated glass adds a second pane and a low-emissivity coating, which helps with afternoon heat gain on projecting windows that catch more sun than a flat unit. For Fort Pierce’s climate, we typically recommend Low-E on any bay or bow that faces south or west.
Seat/shelf sills are the detail most homeowners don’t know to ask for. A standard sill sits flush; a seat sill extends the interior ledge into useful depth, big enough for plants, books, or a cat that has claimed the spot. We fabricate both.
Installation by TruePane Windows & Doors in Fort Pierce
A bay or bow window is only as strong as the installation holding it in the rough opening. The NOA rating assumes a correct install. In a coastal exposure in Fort Pierce or Hutchinson Island, a gap in the perimeter seal or an out-of-square frame means the assembly works against itself under wind load, and the glass can’t do its job.
Our process starts with a pre-install inspection. We check the rough opening, the header, the cantilever support if the bay projects beyond the foundation line, and the condition of the surrounding wall. Then we set the unit level, plumb, and square before any fastener goes in. The perimeter gets AAMA 812 low-expansion foam sealant, and our installation practice follows AAMA 2400/2410 standards for flashing and integration.
We finish with a water test, interior and exterior cleanup, and we walk you through the NOA documentation for your permit file. Fort Pierce and St. Lucie County permit review typically requires a product approval submittal for any new window opening, and we provide the paperwork specific to your configuration. If the opening is new, not a replacement, we’ll flag the structural review early so it doesn’t slow the job later.
When an impact bay or bow is installed by a crew that treats it like a standard window, the system fails before the storm does. That’s why we use the same installers for our bay and bow work as we do for our commercial impact packages. No day-labor, no shortcuts, no “good enough.”
Frequently Asked Questions - Bay & Bow Windows
Design pressure is matched to the wind zone of the specific opening, up to +/-100, never higher. Your address is what determines the figure. In Fort Pierce, most residential openings fall in the HVHZ wind zones, but the exact number depends on the site exposure and building height. We calculate it at quote time, not from a catalog.
Custom fabricated units typically run four to eight weeks from approved shop drawings, depending on the line and the glass package. Low-E insulated laminated units take the longest. If you’re working against a project timeline or a closing date, call (772) 218-5890 early and we’ll tell you what’s realistic for your specific configuration before you commit.
Yes. The permit application for a new or replacement bay or bow window in Fort Pierce requires the product approval documentation. We provide the NOA and Florida Product Approval numbers for your exact configuration, and our team knows how the St. Lucie County reviewers want the submittal organized. It’s paperwork we handle every week, not a one-off.
Every bay and bow we sell is custom fabricated to the opening. You choose the number of lites, the angle of the bay or the radius of the bow, the glass package, the finish, and the sill. There’s no stock size to compromise around. If you’re not sure whether a three-lite bay or a five-lite bow fits the room, we’ll bring samples and measurements and talk it through on site.
Wash the glass and frame with mild soap and water twice a year, check the weep holes at the sill, and keep the perimeter sealant intact. Aluminum and vinyl frames need no repainting. If you use fertilizer or salt-heavy irrigation near the window, rinse the lower frame more often. Call (772) 218-5890 if you ever see condensation between lites or a seal pulling away.
Get a Quote - Bay & Bow Windows in Fort Pierce
If you’re considering a bay or bow window for a Fort Pierce home, start with a free on-site measurement. We’ll check the opening, calculate the design pressure for your wind zone, and give you a written line-item quote with the NOA documentation you’ll need for permit. Call TruePane Windows & Doors at (772) 218-5890 to schedule your free estimate.
Written by the team at TruePane Windows & Doors, serving Fort Pierce, FL and the Treasure Coast.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
