Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Gifford
Custom window and door work in Gifford, Florida almost never starts with a sketch of a perfect arch or a catalog photo. It starts with a jalousie window that will not pass Indian River County wind-load inspection. That is the reality of the housing stock here, and it shapes every estimate we write. TruePane Windows & Doors has been opening up pre-1980 concrete-block homes in Gifford long enough to know exactly what hides behind those corroded aluminum frames. If you are pricing custom windows or doors, call (772) 218-5890 and we will tell you straight what the job involves before anyone touches a wall.
Why TruePane Windows & Doors Is Gifford’s Preferred Custom Windows & Doors Company
Dale Kessler founded this company on a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That standard gets tested harder in Gifford than almost anywhere else we work. The older CBS homes along roads like 43rd Avenue and 45th Street were built tight and simple, and the original window openings were never meant to hold today’s impact-rated units. We know how to resize those rough openings, how to build out concrete block, and how to sequence the work so the county inspection lands when it should.
Gifford homeowners tend to have been in their houses for decades. They remember the contractor who left a fogged seal. They are not shopping for the cheapest bid. They want an installer who answers the phone, shows up in uniform, and stands behind the work in writing. That is the customer we built Custom Windows & Doors around. Every job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves the driveway.
Our Custom Windows & Doors Services in Gifford
Custom Shape Windows
Older Gifford homes rarely offer a standard rectangular opening on every wall. Additions, carports converted to living space, and 1960s architectural choices leave behind trapezoids, half-rounds, and narrow vertical slits. We measure every opening twice, then order the custom shape from manufacturer lines including Andersen and Pella. The concrete block rough opening gets built out or trimmed to exact spec, and the new unit gets set, sealed, and inspected to current wind-borne debris code.
Architectural Grilles & SDLs
Many Gifford homeowners replacing jalousie windows want the look of divided light without losing the clean sightlines of modern impact glass. Simulated Divided Lites, or SDLs, give that effect. We fit them in double-hung and casement units from Andersen, Pella, and ECO Window Systems, matched to the trim style of the house. On a CBS home built in 1962, that detail matters. It keeps the character of the street while bringing the opening to current hurricane-hardening standards.
Oversized Glass Panels
Some Gifford properties have been expanded over the years with large fixed picture windows or wide sliding door openings. Oversized glass in a wind-borne debris region is not a weekend project. Thicker laminated glass, heavier frames, and structural anchoring all come into play, and the permit review at the Indian River County building division looks at every one of those details. We handle the engineering, the order, and the install, and we register the warranty paperwork before the job is closed.
Commercial Storefront Glazing & Curtain Wall Systems
Along the commercial edges of Gifford, we also replace and upgrade storefront glazing and curtain wall systems. Brackish air from the Indian River Lagoon accelerates corrosion on aluminum mullions and door hardware here faster than it does even a few miles inland. We spec materials accordingly and schedule work around the county’s inspection calendar. The same crew that tears out a 1962 jalousie also handles an impact-rated storefront, and the same standard applies: if the pane is not true, the job is not done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gifford
We are an authorized installer for more than a dozen manufacturer lines, and for Gifford work we lean most often on, and ECO Window Systems. Those three cover the practical range of what older CBS homes need: impact-rated double-hungs, low-E argon-filled glass, custom shapes, and SDLs. We quote manufacturer lines side by side on paper so you can see the price difference and the spec difference before you sign. We do not push one brand. We show you the numbers and let the opening dictate what works.
Common Custom Windows & Doors Problems We See in Gifford Homes
- Jalousie glass louvres that cannot pass wind-load inspection. The slat design has no compliant path forward under current Florida Building Code. Every estimate on a pre-1980 Gifford home therefore becomes a full-frame tear-out and impact-unit install, whether the homeowner planned for it or not.
- Corroded aluminum frames from brackish lagoon air. The oxidation eats through the frame corners and compromises the rough opening. By the time we remove the old unit, the concrete block behind it often needs build-out or repair before a new frame can sit square.
- Outdated wiring or undersized framing discovered once walls are opened. A window tear-out occasionally reveals wiring that is not up to current code or framing that was never adequate. Those discoveries trigger additional permit requirements, and we price them in writing before any further work proceeds.
- Failed waterproofing around original window perimeters. Decades of Florida rain and humidity degrade flashing and sealant. When the old frame comes out, we inspect the rough opening for water damage and repair it before setting the new unit. Skipping that step is how a new window leaks within two years.
Pricing for Custom Windows & Doors in Gifford, FL
On a typical Gifford CBS home, a full-frame window replacement runs $900-$1,800 per opening, depending on size, shape, and manufacturer line. Custom shape windows start around $1,200 and climb with complexity and glass specification. Oversized glass panels generally run $2,000-$5,000 per unit once structural anchoring and thicker laminate come into play. Architectural grilles and SDLs add roughly $125-$400 per window depending on pattern and profile. Commercial storefront glazing in Gifford typically starts around $85-$150 per square foot for impact-rated systems. These are the numbers we quote from. We put them in writing, line by line, and anything uncovered mid-job gets priced and approved before we touch it. Call (772) 218-5890 for a free estimate, and we will measure the actual openings and hand you a fixed price.
We Also Serve Cities Near Gifford
Our crews run local to Gifford, and we regularly take on work in Fort Pierce, Fort Pierce South, White City, and South Beach. The housing stock and the wind-borne debris rules are similar across the county, and we apply the same Keystone Standard on every job no matter which side of the city line it is on.
Serving Gifford, FL - Our Local Coverage Area
We’re based in the Gifford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Gifford
Because jalousie glass louvres cannot be retrofitted to meet Indian River County’s wind-borne debris requirements under the Florida Building Code. The design itself has no compliant path forward. On a pre-1980 Gifford home, that means the entire frame comes out, the rough opening gets resized, and an impact-rated unit goes in. It also means an Indian River County permit and a post-installation inspection. Call (772) 218-5890 and we will tell you exactly what to expect for your specific openings.
We price them in writing before we touch any additional work. Our approach is inspection first. When we open a wall and find wiring that is not to current code or waterproofing that has failed, we stop, document the condition, and hand you a written price for the additional scope. You approve it before we proceed. There are no surprise line items on the final bill. That has been the standard since Dale Kessler started the company, and we keep it on every Gifford job.
Yes. Homes within a few miles of the lagoon get noticeably more oxidation on aluminum frames and corrosion on door hardware than properties further inland. We recommend powder-coated aluminum or vinyl frames over bare aluminum where practical, and we choose hardware finishes rated for coastal exposure. The brackish air is one more reason a full tear-out nearly always makes more sense than a patch job in Gifford. For an exact recommendation, call (772) 218-5890.
Expect the wind-borne debris requirement to be the trigger: any replacement window or door opening must receive an impact-rated unit or an approved shutter system. If we open a wall and find outdated wiring, undersized framing, or water-damaged structure, the county may require additional upgrades before the permit is closed. We sequence the work so those upgrades happen in the right order, and we price each one in writing before it starts.
Yes. The concrete block structure actually works in your favor for oversized and custom-shaped openings because CBS walls carry structural load well. We do need to evaluate the lintel above the opening and the block condition around it, and we often install a steel header or reinforced framing when the opening size grows. On 43rd Avenue, we opened up a 1962 CBS home with corroded jalousie frames, resized the rough openings, and installed impact-rated Andersen double-hungs with low-E glass and argon fill before the county inspector signed off. If you need oversized or shaped impact windows, call (772) 218-5890 for a free measure and a fixed written price.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Gifford and the surrounding communities with custom windows and doors done right.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.