Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Port Salerno
Door installation in Port Salerno runs $450 to $3,800 for most residential entry doors, with impact-rated units from PGT or Pella starting around $1,900 installed. That range climbs fast when we open a 1960s fishing-cottage jamb and find what the salt has been doing to the framing. We’ve been pulling corroded jalousie doors off Manatee Pocket homes long enough to know exactly what Martin County’s inspector will flag before we cut the first stud. If you’re off Salerno Road, near the Manatee Pocket, or back in the older streets around Dixie Highway, call (772) 218-5890 and we’ll come measure the opening ourselves.
Dale Kessler founded TruePane Windows & Doors in 2008 because he kept seeing out-of-true installs and voided warranties in Martin County. We’ve been correcting both ever since. Our crews serve Port Salerno locally, coordinate scheduling from our South FL office, and answer the phone with a live person 24 hours a day. No voicemail tree. No callback form. You call, a person picks up.
Why TruePane Windows & Doors Is Port Salerno’s Preferred Door Installation Company
Port Salerno homeowners call us for reasons that don’t show up on a polished brochure. They call because the guy who installed their storm door two years ago used plain steel anchor screws, and now the door swings loose from the concrete-block jamb every time a summer squall pushes through. They call because they tried to replace one door, opened a permit, and got red-tagged when the inspector spotted non-impact jalousie glazing elsewhere on the house. They call because they’ve been burned once and they’re paying close attention this time.
We hold an authorized-installer relationship with more than a dozen manufacturer lines, including PGT, Andersen, Pella, Marvin, and Jeld-Wen. That means when we quote a door for a Port Salerno home, we put two or three manufacturer lines side by side on paper with their warranty durations stated in writing. Not a verbal “it’s covered.” Written. Both warranty layers registered before our truck leaves the driveway. That’s The Keystone Standard, and it’s the baseline on every job.
Our Door Installation team is background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. Every opening gets measured twice. Every estimate is a fixed number, not a starting point. And every job carries the Done Right Promise: if it’s not done right, we make it right. No paperwork fight. No fine print that covers neither party.
We also stand behind the work with a simple rule that’s been on the whiteboard since day one: if the pane is not true, the job is not done. That rule names the company and governs every install we do in Port Salerno.
Our Door Installation Services in Port Salerno
Most Port Salerno homes we work on were built between 1950 and 1980 as working-waterfront cottages. The door openings reflect that. Settled frames, corroded hardware, and rough openings that were never flashed properly. We plan for it from the first measurement.
Entry & Swing Doors
A new entry door on a Port Salerno concrete-block home usually requires rebuilding the jamb, not just hanging a slab. We pressure-treat the sill, flash with butyl tape where the original flange never was, and set the new door square. Impact-rated fiberglass and steel entries from PGT or Pella start around $1,900 installed, but a job with discovered rot and a full jamb rebuild will run $2,600 to $3,800. We write the change order and get your signature before we cut anything.
Storm Doors
Storm doors near the Manatee Pocket fail faster than anywhere else in Martin County. The salt-laden air pitts the hardware, and the steel anchor screws corrode until the door pulls loose from the block. On Port Salerno installs, we spec stainless or ceramic-coated fasteners as standard. A storm door install runs $450 to $950 depending on the door line and whether we’re also repairing anchor points in the jamb.
Arched & Custom Doors
Several of the older cottages along the water still have curved-top openings, and the 1960s jalousie doors were never square to begin with. We build out custom arched jamb kits and re-shim the rough opening so the door swings true at every hinge point. Custom arch-top doors start at $2,800 and run upward with finish grade, glass package, and impact rating.
Bifold & Folding Doors
For interior pass-throughs and closet openings, we set bifolds that don’t bind in July’s humidity. This is a smaller job, usually $350 to $700 installed, but the same standard applies: measure twice, shim the track level, and make sure the door closes flush against the stops. The Done Right Promise covers hardware adjustment if anything shifts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port Salerno
We install and service PGT, Jeld-Wen, Simonton, and Ply Gem lines, plus a dozen other manufacturers we’ve vetted over the years. Because we’re authorized with these makers, we can register both warranty layers in writing and handle warranty service calls without sending you through a corporate maze. We keep common threshold, sweep, and hardware parts stocked for quick turnaround on Port Salerno repairs, which matters when a corroded threshold is letting salt air and rain under the door. You tell us what’s on the door now, we’ll tell you what it actually needs.
Common Door Installation Problems We See in Port Salerno Homes
- Salt-corrosion on aluminum frames. Doors within sight of the Manatee Pocket show white corrosion powder and pitted hardware within five to seven years. Identical doors three miles inland in Stuart are still intact. Every estimate we write here includes a corrosion remediation step: wire-brush, epoxy-fill the pitted areas, and prime before the new jamb goes in.
- Rotted sills and missing flashing. The 1960s builders didn’t flash door flanges, and the oak sill plates have been wicking salt air for decades. By the time the door binds at the top hinge, the rough opening usually needs a rebuild, not a shim. That’s a discoverable condition we plan for and price upfront.
- Failed anchor screws on storm doors. Plain steel screws in a concrete-block jamb corrode within two seasons near the water. The door pulls loose, the screen tears, and the next wind event finishes the job. We spec stainless or ceramic-coated fasteners on every Port Salerno storm door install.
- Jalousie door openings that are not square. The louvered frames settled over fifty years, and a standard pre-hung door will bind at the top hinge if you don’t re-square the rough opening before setting the jamb. We shim, re-square, and only then set the door. Skipping this step is how you end up with a door that only latches in dry weather.
Pricing for Door Installation in Port Salerno, FL
Here’s what you can expect to pay for door work in Port Salerno in 2025. A standard storm door install runs $450 to $950. A pre-hung entry door with impact glazing starts at $1,900 and goes to $3,200 for a fiberglass unit with sidelights. A full jamb rebuild with rot remediation and flashing adds $700 to $1,100 on top of the door price. Custom arched doors start at $2,800. Bifold interior doors run $350 to $700. What moves your number: whether we’re rebuilding a jamb, whether the house is on the water or three blocks inland, and what the permit requires. We put every dollar on paper before we start. No surprise line items. Call (772) 218-5890 for a free estimate at your door.
We Also Serve Cities Near Port Salerno
Our crews cover the Martin County corridor from Stuart to Hobe Sound, and we’re regularly in Palm City and Jensen Beach for the same door work we do in Port Salerno. The pricing and permit environment changes slightly across the county, so if you’re a few miles over the line, call us directly and we’ll tell you what applies to your address.
Serving Port Salerno, FL - Our Local Coverage Area
We’re based in the Port Salerno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Port Salerno
Salt air accelerates rubber and foam weatherstripping breakdown by a factor of roughly two to three compared to inland homes. The constant salt-saturated humidity off the Manatee Pocket leaves a fine chloride film on everything, and that film attacks both the stripping material and the adhesive backing, so seals crack and peel within a couple of seasons instead of five or six years. We replace weatherstripping with marine-grade EPDM or silicone bulb seals on Port Salerno doors, and the labor is covered under our workmanship warranty. Call (772) 218-5890 if your door is leaking air or water at the threshold; we’ll tell you what’s worth replacing and what’s just cleaning.
Yes, in most cases. When you open a permit on a pre-2004 Port Salerno home, the Martin County inspector will look at every exterior opening on the structure, not just the door you’re replacing. Jalousie windows cannot be made impact-rated, so they get flagged, and the permit will not close until they’re gone. Homeowners who get a handyman to skip the permit end up red-tagged at final inspection with a gaping hole and no legal occupancy. We tell you this before we quote the door, because it changes your total project cost and timeline. The door itself is often the smallest line item on a Port Salerno permit that triggers window replacement. Call us for a straight answer about what your specific house will trigger.
We drill into the block with a hammer drill, blow out the dust, and set the jamb using stainless steel sleeve anchors or epoxy-set threaded rod, never plain wood-grip screws. The concrete in these 1950s and 1960s cottages is often softer than modern block, especially near the Manatee Pocket where salt has wicked into the masonry, so we also inject epoxy into the anchor holes before setting the fasteners. For manufactured homes, we use a different anchoring system altogether, with floor-joint strapping and bottom-wall plates rated for the Florida Building Code’s 150 mph design wind speed. The anchor method is part of every written quote, not a detail we figure out on the truck ride over.
Sometimes. If the door is a standard inset unit with a replaceable insulated glass pack, we can swap the glass without pulling the whole frame. On older Port Salerno doors, the aluminum sash is often too corroded to accept a new glass pack without leaking again within a year, and the hardware is usually on its way out too. We’ll tell you honestly which situation you have, and we’ll quote both the glass-only repair and the full door replacement so you can compare the numbers side by side. The honest answer saves you from paying twice.
Yes. Manufactured and mobile units have wall cavities too shallow for standard pre-hung exterior doors and require specialized frame and anchoring solutions to meet hurricane compliance. The bottom plate on many older Port Salerno manufactured homes has also degraded from salt and moisture, so we inspect it before we order the door. We’ve installed enough doors in the harbor-side neighborhoods to know what needs reinforcement and what the Martin County inspector will accept. If your home is on a slab or piers near the water, call (772) 218-5890 and we’ll walk the opening with you before we write the quote.
On a 1963 concrete-block cottage off Salerno Road, we pulled a corroded aluminum jalousie door and found the rough opening had rotted oak sill plates and no flashing tape behind the original flange. Martin County’s inspector flagged the open permit for non-impact glazing. We rebuilt the jamb with pressure-treated lumber, flashed the sill with butyl tape, installed a 150-mph impact-rated Pella fiberglass entry door, and wrote a change order for the discovered rot. Priced, signed, and approved before we cut anything. That’s how we handle every surprise a Port Salerno door opening turns up.
If you’re ready to replace a door or just want an honest read on what your house needs, call (772) 218-5890. The estimate is free. The answer is straight. And the work is done right, or we come back.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port Salerno and Martin County with door and window installation since 2008 through a glazier’s craft tradition.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.