Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across White City
Door installation in White City, FL runs $850-$3,900 for most entry and storm doors, with impact-rated units on the higher end because St. Lucie County code requires wind-borne debris compliance on every exterior opening. We’ve been installing doors throughout White City long enough to know which homes need full rough-opening remediation before a new unit can even be set. If you’re in White City and your front door binds, sags, or won’t seal against the salt air, call (772) 218-5890 and Dale Kessler’s crew will give you a straight price and a paper trail that passes inspection the first time.
Why TruePane Windows & Doors Is White City’s Preferred Door Installation Company
We’re not the cheapest door installer in White City, and we don’t try to be. We’re the company that shows up when we say, measures every opening twice, and registers both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard. It’s how Dale Kessler has run TruePane since 2008, building on years of glazing craft in Florida communities.
What does that mean for a White City homeowner? It means our techs know the difference between a mid-century CBS home off Oleander Ave and a wood-frame cottage near the Indian River Lagoon. It means when we pull a permit for your door replacement, we already know the St. Lucie County inspector will want to see the wind-load documentation, the fastener schedule, and the flashing detail. We bring all of it. If the pane is not true, the job is not done.
White City customers call us after the other guy’s door starts racking in the first storm season. They stay with us because a live person answers the phone 24/7, and because our Done Right Promise means if something isn’t right, we fix it. No paperwork fights. No arguing. No fine print that covers neither.
Our Door Installation Services in White City
Every exterior door we set in White City is spec’d to the wind-borne debris region and the humid, salt-laced conditions that come with living this close to the Indian River Lagoon. Here’s what we handle most often for homes in the 34982 and surrounding streets.
Entry & Swing Doors
Most entry doors in White City are either original single-panel aluminum from the 1960s and 70s, or impact replacements rushed in after the 2004 storms. Those post-storm units are now twenty years old. We replace them with impact-rated fiberglass or steel units rated for St. Lucie County’s required design pressure. A standard single entry door replacement in White City typically runs $850-$1,800, and if the rough opening needs remediation, add $300-$900 for framing and flashing work.
Storm Doors
A storm door on a White City home does double duty: it protects the primary door from salt corrosion and UV, and it gives you cross-ventilation during the weeks when the humidity sits thick. But a cheap storm door with uncoated aluminum hardware will corrode at the hinges within three years this close to the Lagoon. We spec coated hardware and reinforced jambs as standard. Storm door installation runs $400-$1,100 depending on glass type and frame material.
Bifold & Folding Doors
For White City patios and lanai openings, bifold and folding door systems are a practical choice, but they must be rated for the same wind pressure as any other exterior opening in the county. We install multi-panel folding doors from lines we’ve vetted, with tracks and rollers built to handle daily use without binding. Expect $2,800-$7,500 for a typical 3-4 panel opening, installed and inspected.
Pivot Doors
Pivot doors are gaining ground in White City’s newer custom homes and full renovations along the river side. A pivot door carries its weight on a top and bottom hinge system, which means the framing has to be dead level and the header sized correctly. On older CBS or wood-frame homes, that often means opening up the wall first. We quote the door, the hardware, and the structural work as one line item so there are no surprises on the bill. Pivot door installations start around $2,200 and run up from there based on size and custom millwork.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Arched & Custom Doors
White City’s early 1900s cottages occasionally still carry original arched openings, and homeowners who want to keep that character need a door built to the opening, not the other way around. We measure, shop, and install custom arched units with the same wind-load documentation a code inspector expects on any other exterior door. Custom arched door work in White City starts around $1,500 for a basic unit and climbs with material and glass choices.
Trusted Brands We Service in White City
TruePane is an authorized installer for more than a dozen manufacturer lines, and for White City door work we regularly quote side by side on paper so you can see exactly what you’re buying at each price point. We also service Jeld-Wen and other common lines already installed in older White City homes. Because we stock common hardware and weatherstripping locally, turnaround on parts and adjustments is measured in days, not the four to six weeks some suppliers quote. Whether you need a new impact-rated entry system or a hardware refresh on a door that’s still worth saving, we’ll show you the options and register the warranty layers before we leave.
Common Door Installation Problems We See in White City Homes
- Failed post-2004 storm doors. The wave of emergency replacements installed after Hurricanes Frances and Jeanne are now two decades old. Seals are shot, hardware is corroded, and many no longer meet current Florida Building Code wind-load standards. These doors need full replacement, not re-caulking.
- Rotted rough openings in older wood-frame cottages. White City’s early 1900s wood construction was never designed for impact-rated door weight. When we pull the old jamb, we often find rot and undersized headers that must be remediated before the new unit can pass inspection.
- Salt-corroded hinges and thresholds. Persistent humidity off the Indian River Lagoon eats uncoated steel and aluminum within a few years. Doors that bind in July or sag off their hinges are almost always a hardware corrosion problem, and the fix is coastal-grade hardware, not another coat of paint.
- Non-impact doors with no shutter plan. A door that isn’t impact-rated must be backed by an approved shutter or panel system to pass St. Lucie County’s wind-borne debris inspection. Installers who skip this step leave homeowners with a red-tagged opening and no certificate of compliance.
Pricing for Door Installation in White City, FL
Here’s what we see across White City in 2025. A standard entry door replacement with basic impact-rated fiberglass runs $850-$1,800. Storm doors run $400-$1,100. A full-frame entry system with sidelights on a CBS home runs $2,200-$3,900. Arched and custom doors start around $1,500 and bifold or folding patio systems run $2,800-$7,500. The factors that move price are opening size, wind-load rating required, framing remediation, and hardware grade. Every quote we write is line-item, on paper, with no change orders snuck in later. Call (772) 218-5890 to schedule a free estimate, and we’ll measure and quote same day in most White City neighborhoods.
We Also Serve Cities Near White City
Our Door Installation crew works throughout the Treasure Coast, and we regularly run jobs in Fort Pierce, Fort Pierce South, South Beach, and Vero Beach South from our White City area routes. If you’re in White City or a neighboring community, the same crew, the same standard, and the same live-answer phone line apply. Call (772) 218-5890 and we’ll get you on the schedule.
Serving White City, FL - Our Local Coverage Area
We’re based in the White City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in White City
Yes, St. Lucie County’s post-2004 code requires that every exterior door be either impact-rated or backed by an approved shutter or panel system that meets the wind-borne debris region standard. If you have shutters that meet code, a non-impact door can pass. But the shutter system must be documented and approved, and the inspector will ask for that documentation. Many older shutters installed before the code change don’t meet current standards. Call (772) 218-5890 and we’ll tell you what your opening actually requires before you spend a dollar.
Because the original rough openings in White City’s early 1900s wood-frame cottages were not built to hold the weight of a modern impact-rated door or to resist the racking forces of hurricane winds. When we pull the old jamb, we commonly find rotted framing, undersized headers, and fastening patterns that won’t pass a wind-load inspection. The fix is removal and replacement of the damaged framing, new header sizing, and proper flashing. We quote this work as a separate line item so you see exactly what the structure needs, not a vague “unforeseen conditions” surcharge later.
Yes. St. Lucie County requires a permit for any exterior door replacement, and pulling that permit triggers a full opening inspection. The inspector will verify the wind-load rating, the fastener schedule, and the flashing detail. A door installed without a permit in White City is a red-tagged code violation that can stall a future sale and complicate a storm damage claim. TruePane pulls every permit and we stand behind the inspection the way we stand behind the install.
A compliant White City door installation includes a permit, a wind-load rating documented on the final inspection record, a fastener schedule appropriate to the structure type, polyurethane flashing tape at the rough opening, coastal-grade hardware, and the final paperwork that proves the opening meets current code. A cheap quote often omits the permit, skips the flashing, uses uncoated hardware that will corrode within a few years, and leaves you with no documentation for your insurance file. That documentation matters when a claim or a policy review comes up after a storm. Call (772) 218-5890 and we’ll walk you through exactly what your quote should include.
In White City’s salt-laced humidity, impact-rated exterior doors typically last 15-25 years before seals fail, hardware corrodes, or the unit falls below current wind-load standards. Many of the impact doors installed in the wave after the 2004 hurricanes are now at or past that threshold. A door that’s binding, leaking air, or showing corrosion at the hinges and threshold is telling you it’s time. We can assess what’s recoverable and what’s not without charging you for a sales pitch. Estimates are free.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving White City and the surrounding Treasure Coast community with the standard that if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.