Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Indiantown
Door installation in Indiantown carries a set of requirements most contractors in Stuart or Palm City never deal with. The town’s housing stock is largely pre-1990s manufactured homes and modest wood-frame rentals, which means door openings often follow HUD dimensions, not standard residential rough openings. A crew that shows up with a standard 36×80 slab will frequently find it doesn’t fit the opening at all. Our Door Installation team knows the difference because we work these properties every week. If you need a door replaced, re-framed, or brought up to Martin County’s wind-load code, call (772) 218-5890.
Why TruePane Windows & Doors Is Indiantown’s Preferred Door Installation Company
We’re the company Indiantown homeowners call after another contractor has walked away from a HUD-sized opening or a rotted sill. Dale Kessler founded TruePane in 2008 on a rule that still hangs over the shop: if the frame is not true, the job is not done. That rule matters more in Indiantown than almost anywhere else in Martin County, because the framing around a 1980s double-wide door is rarely square, rarely plumb, and rarely the size printed on the box.
Our technicians are background-checked and uniformed. They measure every opening twice before ordering anything. They quote manufacturer lines side by side on paper so you see exactly what you’re buying, and they register both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it applies to every job we do in Indiantown.
We also answer the phone. A live person picks up 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. When a back door in the Seminole Woods community off Warfield Boulevard is wedged shut and the afternoon rain is moving in, you need a person on the line who knows the area. That’s us.
Our Door Installation Services in Indiantown
We install, replace, and retrofit every type of exterior and interior door common to Indiantown homes. The service we recommend most here is not always the same one we’d recommend in a coastal subdivision in Stuart, because the structures are different and the failure modes are different.
Storm Doors
Storm doors are the single most underspecified product in Indiantown, and the one failure we see most often in manufactured-home parks. A cheap storm door from a big-box store will not meet Martin County’s Florida Building Code when a retrofit is triggered by a re-roof or siding permit. We supply and install storm doors with wind-load-rated frames and hardware, sized to HUD openings, and flashed properly to keep the low-lying humidity from rotting the sill underneath. In Indiantown, a storm door is not an accessory. It’s the first line of defense against radiant heat, afternoon downpours, and insect pressure.
Entry & Swing Doors
Entry door replacement in Indiantown often begins with the frame, not the slab. On a 1983 double-wide, the rough opening was built to a HUD horizontal slider dimension. A compliant entry door installation usually requires re-framing that opening before a standard swing door can be set. We build that into the quote up front, with line items on paper, so there’s no discovery halfway through the project and no second appointment left hanging. Most entry door jobs in Indiantown are completed in a single visit once the materials are in hand.
Double & French Doors
Double doors and French doors present a particular challenge in Indiantown’s wood-frame homes. The combined span of two door leaves puts more load on the header, and many of these older frames were built with a single 2×4 header that sags within a decade. We re-frame the opening with the correct header size for the span and the wind load, then set the doors with fusion-welded frames. If you’re replacing a sliding glass door with French doors in a manufactured home, the rough opening will need to be re-engineered. We handle that in-house.
Pivot Doors
Pivot doors are rare in Indiantown, but we do a handful each year for homeowners who want a wider, more modern entry on a site-built addition or a custom built home. Pivot hardware carries enormous point loads, and in a high-humidity, high-radiant-heat environment like Indiantown, the tolerance on the floor plate has to be tighter than it would be in a dry climate. A pivot door that binds in July is usually the result of a contractor who ignored thermal expansion. We don’t ignore it.
Arched & Custom Doors
Some of the nicest homes in Indiantown are the custom built ones, and some of those have arched openings that standard products will never fit. We measure, template, and order custom arched doors from manufacturers we’ve worked with for years. The lead time is longer, but the fit is right the first time. Custom work in Indiantown follows the same Keystone Standard: both warranty layers registered in writing, durations stated, no fine print that covers neither.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Indiantown
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Indiantown’s manufactured-home market, we carry and install PGT impact-rated doors, Jeld-Wen entry systems, and Simonton storm-door products, all of which carry documentation accepted by Martin County building inspectors. Because we regularly work the same manufactured-home communities off Warfield Boulevard and Indiantown Road, we keep common HUD-sized slab and frame components in our inventory, which shortens turnaround for Indiantown customers. A live person on the phone can confirm same-day availability for standard sizes. Call (772) 218-5890.
Common Door Installation Problems We See in Indiantown Homes
- Rotted wood-frame door sills. Indiantown sits in a low-lying inland basin near Lake Okeechobee. The soil holds moisture, the humidity is relentless, and unflashed thresholds wick water into the framing. We see sills rotted to the point of failure within three to five years, especially on absentee-landlord rentals where the original storm door was removed and never replaced.
- HUD-sized openings with the wrong product installed. Technicians who primarily work site-built homes in Stuart or Palm City often bring a standard 36×80 slab to a manufactured home with a 1970s-era HUD slider opening. The result is a poorly shimmed install with gaps that compromise wind-load resistance and void the manufacturer’s impact warranty.
- Doors that bind in summer. Indiantown’s extreme radiant heat causes wood frames to swell and vinyl tracks to warp. A door that was hung square in January can stick in July. This is almost always a clearance and flashing issue that can be corrected, but it’s not something you should live with, because a binding door is also a door that won’t seat properly against wind-driven rain.
- Failed wind-load inspections on retrofits. When a re-roof or siding permit triggers a Fenestration Retrofit Inspection in Indiantown’s pre-1990s mobile home parks, doors installed without impact-rated glazing or wind-load-rated hardware fail. The homeowner then pays twice: once for the cheap install, and again for the compliant one. We’d rather quote the compliant job the first time.
Pricing for Door Installation in Indiantown, FL
A standard entry door swap on a site-built home in Indiantown typically runs $800 to $1,600 for a steel or fiberglass slab with basic hardware. A storm door installation, properly flashed and wind-load rated, runs $450 to $950. Double French door replacement in a wood-frame home runs $2,200 to $4,500, depending on whether the headered opening needs re-framing. Impact-rated entry doors on manufactured homes run $1,500 to $3,200, and the price includes the re-framing that a HUD-sized opening almost always requires. Pivot doors and custom arched doors are quoted after measurement, but budget $4,000 and up for the door alone. Every quote we write includes line items for the door, the frame, the flashing, and the permit work. The estimate is free. Call (772) 218-5890 to schedule one.
We Also Serve Cities Near Indiantown
While this page is focused on Door Installation in Indiantown, our crews also serve Palm City, Stuart, Port Salerno, and Jensen Beach. If you live in one of those communities, the same Keystone Standard applies to the work, and the same live person answers the phone.
Serving Indiantown, FL - Our Local Coverage Area
We’re based in the Indiantown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Indiantown
A door installation in Indiantown must meet the wind-load requirements of Martin County’s Florida Building Code, which for inland zones typically means a design pressure rating of at least ±50 psf for components and cladding, though the exact rating depends on the structure’s exposure category and roof height. For manufactured homes, the governing standard is HUD code administered through Martin County, which requires doors to meet the wind zone rating for the home’s location. We confirm the required rating for your specific property before ordering any product, and we document the compliance on paper for your records and your insurance company.
If the jamb or sill is rotted through, the correct repair is to re-frame the opening, not to sister in a patch or hang a new slab on a compromised frame. This is especially true on manufactured homes in Indiantown, where the original frame was built to HUD dimensions and the rotted section often extends beyond the visible damage. We remove the door, expose the rough opening, replace the damaged framing with pressure-treated lumber, and re-flash the threshold to Martin County requirements before installing the new door. On about eight out of ten Indiantown manufactured-home door replacements, the opening needs at least partial re-framing. We tell you this up front and include it in the written quote.
Door replacements in Indiantown that involve structural re-framing or that fall under a Fenestration Retrofit Inspection triggered by a re-roof or siding permit generally require an inspection by Martin County’s building department, not an independent third party. The inspector will verify that the door product carries the required design pressure rating for the wind zone, that the flashing installation meets the Florida Building Code, and that the anchorage and hardware match the manufacturer’s approved installation drawings. We pull the permit, schedule the inspection, and stand with you through the process until it passes. Our Done Right Promise covers the workmanship on every Indiantown install, so if the inspector flags something we missed, we make it right without a paperwork fight.
A documented wind-load-compliant door installation can reduce your insurance premium, but only if you submit the right paperwork. Insurers in Florida offer wind mitigation credits for openings that carry a Florida Product Approval or Miami-Dade Notice of Acceptance number, and the credit applies only when the installation is documented with a permit and a final inspection. A door installed without documentation is worth nothing on an insurance audit, even if the product itself was rated. We register both warranty layers in writing, provide the product approval numbers, and make sure the permit and inspection record are in your file before the truck leaves the driveway. Call (772) 218-5890 and we will walk you through what your insurer needs.
A storm door is a secondary door installed in front of an existing entry door. It provides airflow, insect protection, and an extra layer of weather resistance, but it does not meet the Florida Building Code’s impact-resistance requirement for a primary exterior opening. An impact-rated entry door is a primary door with laminated glass or a solid core and wind-load-rated hardware, tested and approved to withstand wind-borne debris. In Indiantown’s manufactured-home parks, when a retrofit is triggered by other permits, the primary door must be impact-rated. A storm door in front of it is a useful addition, not a substitute. We quote both options side by side on paper so you can see the exact product and the exact rating you’re paying for.
If you live in Indiantown and you’re tired of a door that binds, a sill that’s soft underfoot, or an opening that no contractor wants to touch, call TruePane Windows & Doors at (772) 218-5890. We’ll send a background-checked, uniformed technician to measure, quote, and get the work done right. We’ll be there when we say, and we stand behind the work in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Indiantown and Martin County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.